Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-12-21 20:58:47

pmk33
Member
Registered: 2015-12-21
Posts: 3

Raw data of snoop command (HF)

I want to get the raw data of the snoop command in order to make a plot with the information. I wonder if there is a command that allow me to get it.

I am using a Pegoda reader and Mifare Classic tags.

I am not sure is "Hexsamples" command could help me

Thanks

Offline

#2 2015-12-21 21:14:47

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Raw data of snoop command (HF)

data plot - show the plot window
data samples  - to download data in bigbuff on device.

Offline

#3 2015-12-21 21:34:28

pmk33
Member
Registered: 2015-12-21
Posts: 3

Re: Raw data of snoop command (HF)

Thanks, But "data samples" give me the raw data of the snoop command? I am usign an HF tag and I not sure if that information corresponds with the one I need. Also I want to get a file with the raw data information how can I achieve that? Because when I use the command "data samples" this happens

proxmark3> data samples 20
Reading 20 bytes from device memory
Data fetched         
Samples @ 8 bits/smpl, decimation 1:1 

But where can I save that information?

Offline

#4 2015-12-21 21:49:04

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Raw data of snoop command (HF)

If you look at the data commands and the answer will be clear. 

Btw you would read 20000-40000 bytes from a raw signal

Offline

Board footer

Powered by FluxBB