Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2016-04-22 16:21:05
- nmhrgk
- Member
- Registered: 2016-04-21
- Posts: 4
Can anyone help identify what type of access card is this?
Offline
#2 2016-04-22 16:22:08
- nmhrgk
- Member
- Registered: 2016-04-21
- Posts: 4
Re: Can anyone help identify what type of access card is this?
https://drive.google.com/open?id=0B0jxPtb20OOdSGtJeEpSaFJVVVE
Offline
#3 2016-04-22 16:35:20
- nmhrgk
- Member
- Registered: 2016-04-21
- Posts: 4
Re: Can anyone help identify what type of access card is this?
I'm not too sure what cards is this, but when I using ProxMark3 with LF antenna.
Tried with Indala Command:
LF read
Data Sample 4000
Lf indalademod (Manage to get the UID)
Lf indalaclone (cloning to a T55xx blank card)
Clone success.
But when check both card UID is the same.
When trying to use it, but it just does not be able to detect anything.
Please advise.
Offline
#4 2016-04-24 03:29:23
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Can anyone help identify what type of access card is this?
Read through this: http://www.proxmark.org/forum/viewtopic.php?id=2907
Offline
#5 2016-04-24 14:14:58
- nmhrgk
- Member
- Registered: 2016-04-21
- Posts: 4
Re: Can anyone help identify what type of access card is this?
Ok. Thank you very much! I will go and read through it (:
Offline
#6 2016-04-29 15:46:00
- mnelson
- Contributor
- From: Outside Denver, CO, USA
- Registered: 2015-06-05
- Posts: 33
Re: Can anyone help identify what type of access card is this?
My guess is that it's a SecuraKey RadioKey RKCM 01 card. SecuraKey hot-stamps their numbers just like the one you have pictured. I think it's an 01 card rather than an 02 since there is no Facility Code stamped in the lower left corner. I've never had much luck with this one using my PM3.
Offline