Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-07-21 11:40:05
- eidoooo
- Contributor
- Registered: 2016-07-12
- Posts: 5
500 $ = for 1 k Mifare clone
hi I need someone help me to do 1 Mifare clone step by step
and I will pay for him 500 $
kwal3z84@gmail.com
Offline
#2 2016-07-21 15:47:05
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,505
- Website
Re: 500 $ = for 1 k Mifare clone
there has been so much written about how to clone a mifare tag that you can save your money and read up on it here on this forum. If you already have PM3, it will only take you 3hours before you know it all.
read the wiki on github: https://github.com/Proxmark/proxmark3/w … re%20HowTo
Offline
#3 2016-08-19 04:33:42
- ericlam2728
- Contributor
- Registered: 2015-09-26
- Posts: 34
- Website
Re: 500 $ = for 1 k Mifare clone
hey iceman for the 4k mifare chips the only way to crack it is to use the darknested command right?
Offline
#4 2016-08-19 07:34:03
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,505
- Website
Re: 500 $ = for 1 k Mifare clone
Please don't hijack a thread. Start a new one.
1k or 4k size doesn't matter, what matter is if the tag uses the newer prng. run 'hf mf darkside' and you get a message if you need to use the hardnested command.
Offline
Pages: 1