Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-11-03 16:52:50

phiber
Contributor
Registered: 2016-10-11
Posts: 37

help: Resetting T5577 card to default after i wrote it as a EM410x tag

I had a T5577 card which i tested and was able to code it into a HID, indala or viking using the PM3.
then i used a china multi-freq device (with the color lcd) and write it with 125khz mode while testing the device.

This is what the card shows now:

Reading 30000 bytes from device memory
Data fetched          
Samples @ 8 bits/smpl, decimation 1:1           
NOTE: some demods output possible binary
  if it finds something that looks like a tag          
False Positives ARE possible
Checking for known tags:
EM410x pattern found:           
EM TAG ID      : 0000030D40          
Unique TAG ID  : 0000C0B002          
Possible de-scramble patterns          
HoneyWell IdentKey {          
DEZ 8          : 00200000          
DEZ 10         : 0000200000          
DEZ 5.5        : 00003.03392          
DEZ 3.5A       : 000.03392          
DEZ 3.5B       : 000.03392          
DEZ 3.5C       : 003.03392          
DEZ 14/IK2     : 00000000200000          
DEZ 15/IK3     : 000000012627970          
DEZ 20/ZK      : 00000000120011000002          
}
Other          : 03392_003_00200000          
Pattern Paxton : 1526592 [0x174B40]          
Pattern 1      : 655686 [0xA0146]          
Pattern Sebury : 3392 3 200000  [0xD40 0x3 0x30D40]          
Valid EM410x ID Found!         

Now i can't use the tag as a HID or Indala or viking tag anymore as it seems to be "locked" to the em410x
how can i reset the card so that it can be used as a t5577 again?

Offline

#2 2016-11-03 17:03:00

iceman
Administrator
Registered: 2013-04-25
Posts: 9,537
Website

Re: help: Resetting T5577 card to default after i wrote it as a EM410x tag

those chinese cloners tools are known to set the password bit.
Search the forums for details.

Offline

#3 2016-11-07 17:17:29

Danz
Contributor
From: Dubai
Registered: 2015-10-24
Posts: 98

Re: help: Resetting T5577 card to default after i wrote it as a EM410x tag

you can try
lf t55 wr 00148040 00000000

but will break your card if locked by password as iceman said smile

Offline

Board footer

Powered by FluxBB