Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
MIFARE S70 changeable.
How to write down the new block? It works on gen2? remagic.lua and formatMifare.lua not work.
hf 14a raw -p -b 7 40
received 0 octets
hf 14a raw -p -b 7 26
received 2 octets
02 00
A000 and 30000 not work.
I can't rewrite 0 block.
proxmark3> hf 14a raw -p -s e0 50 bc a5
received 4 octets
XX XX XX XX
received 11 octets
09 78 00 91 02 DA BC 19 10 F0 05
proxmark3> hf 14a raw -p 0a 00 00 a6 b0 00 10 14 1d
received 6 octets
0A 00 90 00 F3 93
proxmark3> hf 14a raw -p 0b 00 00 a6 b0 01 10 19 9b
received 6 octets
0B 00 90 00 48 8F
UID : xx xx xx xx
ATQA : 00 02
SAK : 18 [2]
TYPE : NXP MIFARE Classic 4k | Plus 4k SL1
SAK incorrectly claims that card doesn't support RATS
ATS : 09 78 00 91 02 da bc 19 10 f0 05
- TL : length is 9 bytes
- T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 8 (FSC = 256)
- TA1 : different divisors are supported, DR: [], DS: []
- TB1 : SFGI = 1 (SFGT = 8192/fc), FWI = 9 (FWT = 2097152/fc)
- TC1 : NAD is NOT supported, CID is supported
- HB : da bc 19 10
Answers to chinese magic backdoor commands: NO
Last edited by dimvia (2017-03-11 15:57:24)
Offline
Pages: 1