Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-06-28 12:18:09
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
[solved] mf hardnested
I am trying to mf hardnested my mf card but getting this error .
proxmark3> hf mf hardnested 15 A FFFFFFFFFFFF 3 A
--target block no: 3, target key type:A, known target key: 0x000000000000 (not set), file action: none, Slow: No, Tests: 0
time | #nonces | Activity | expected to brute force
| | | #states | time
------------------------------------------------------------------------------------------------------
0 | 0 | Start using 4 threads and AVX2 SIMD core | |
0 | 0 | Brute force benchmark: 415 million (2^28.6) keys/s | 140737488355328 | 4d
5 | 0 | Using 233 precalculated bitflip state tables | 140737488355328 | 4d
#db# unknown command:: 0x0613
Waiting for a response from the proxmark...
Don't forget to cancel its operation first by pressing on the button
Error: No response from Proxmark.
Last edited by speedlimits (2017-06-29 07:44:07)
Offline
#2 2017-06-28 14:20:21
- piwi
- Contributor
- Registered: 2013-06-04
- Posts: 704
Re: [solved] mf hardnested
Please post the output of hw version. You probably forgot to upgrade (flash) your firmware.
Offline
#3 2017-06-28 14:42:57
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: /-suspect 2016-11-09 00:59:56
#db# os: /-suspect 2016-12-08 12:45:38
#db# HF FPGA image built on 2015/03/09 at 08:41:42
#db# Modify by Willok(willok@163.com)
#db# proxmark3.taobao.com
proxmark3>
Offline
#4 2017-06-28 15:07:47
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: [solved] mf hardnested
You need to flash your device with latest (v3.0.1) firmware for hardnested to work
Offline
#5 2017-06-28 15:09:23
- piwi
- Contributor
- Registered: 2013-06-04
- Posts: 704
Re: [solved] mf hardnested
... which confirms my assumption. You did not upgrade the firmware. Your current firmware lacks hardnested support.
Offline
#6 2017-06-28 15:49:01
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
As simple as it may seems to be. Can't get it to flash it. I am a windows user. I am searching on wiki and download the pm3-bin-756... files. But It won't flash. Window is seeing my hardware at port 6
Offline
#7 2017-06-28 16:16:33
- piwi
- Contributor
- Registered: 2013-06-04
- Posts: 704
Re: [solved] mf hardnested
From where did you get your new client software?
Offline
#8 2017-06-28 16:18:53
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
A link in the GitHub wiki.
Under windows--
Update proxmark
Offline
#9 2017-06-28 16:20:15
- piwi
- Contributor
- Registered: 2013-06-04
- Posts: 704
Re: [solved] mf hardnested
I don't mean the link to pm3-bin-756. From where did you get the client software (proxmark3.exe) which has the hardnested command?
Last edited by piwi (2017-06-28 16:21:46)
Offline
#10 2017-06-28 16:25:37
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
I only downloaded https://code.google.com/archive/p/proxmark3/downloads the pm3-bin-756 . there you have a proxmark3.exe under "pm3-bin-756 (cdc+lua)\pm3-bin-756\win32 (client+GUI)"
Offline
#11 2017-06-28 16:36:48
- piwi
- Contributor
- Registered: 2013-06-04
- Posts: 704
Re: [solved] mf hardnested
.. and this proxmark3.exe doesn't have a hf mf hardnested command. Your proxmark3.exe is much newer than the one in the google archive. You therefore must have downloaded it elsewhere. At the same link you should find the correct firmware as well.
Offline
#12 2017-06-28 16:38:01
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: [solved] mf hardnested
....wasn't there an issue on github about this... https://github.com/Proxmark/proxmark3/issues/316... I know I rubbing it in..
To @speedlimits, NO, the only version you are suppose to use is the latest source code or release v3.0.1. nothing else
Download from here http://www.proxmark.org/forum/viewtopic.php?id=3975
or if you know how to compile, download from the offical github repo.
Offline
#13 2017-06-28 16:54:32
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
ok got the firmware from here now : http://www.proxmark.org/forum/viewtopic.php?id=3975
i click on "FLASH - fullimage.bat"
after clicking on any key i get :
"Waiting for Proxmark to appear on com5."
although i changed it in the go.bat folder to 11.
Last edited by speedlimits (2017-06-28 17:04:43)
Offline
#14 2017-06-28 16:57:09
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
ok got the firmware from here now : http://www.proxmark.org/forum/viewtopic.php?id=3975
i click on "FLASH - fullimage.bat"
after clicking on any key i get :
"Waiting for Proxmark to appear on com5."
although i changed it in the go.bat file to 11.
roxmark3> hw version
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 0 bytes ( 0%). Free: 262144 bytes (100%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
Last edited by speedlimits (2017-06-28 17:05:01)
Offline
#15 2017-06-28 17:04:45
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: [solved] mf hardnested
see http://www.proxmark.org/forum/viewtopic.php?id=4904
or the many other posts about flashing your device.
Offline
#16 2017-06-28 17:28:41
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
ok thanks ,
do i now have the correct formware ? :
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument
bootrom: master/v2.2.0-528-g2a7861e-suspect 2017-06-27 09:17:15
os: master/v2.2.0-528-g2a7861e-suspect 2017-06-27 09:17:19
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/05/17 at 17:48:26
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 192561 bytes (73%). Free: 69583 bytes (27%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
Offline
#17 2017-06-28 17:39:47
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: [solved] mf hardnested
looks better yes. does your command work?
Offline
#18 2017-06-28 17:52:33
- speedlimits
- Contributor
- Registered: 2017-06-28
- Posts: 31
Re: [solved] mf hardnested
YES
finally i can start with R&D tool
:-)
thanks for you time helping me out !!
Offline
#19 2017-06-28 18:52:50
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: [solved] mf hardnested
edit your first post and add the prefix "[solved]" to your subject line
Offline
Pages: 1