Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-08-29 04:04:49

Erictsk
Contributor
Registered: 2015-05-22
Posts: 39

cloned Mifare Ultralight cant access hotel lift

Hi guys,

Recently, I brought the proxmark to my vacation. I cloned the room key (ultralight) and the cloned card is able to access my room. However, I am not able to use the cloned card to access the lift, but the original issued card is able to. Quite strange to me.

Initial thought is that perhaps some portion of the cloned card is not written probably. I read back the content(512 bits) of both cards, the contents are the same.

Anyone has any explanation?

Offline

#2 2017-08-29 05:23:02

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: cloned Mifare Ultralight cant access hotel lift

depends if you used a magic ultralight card or not.  If not then the uid is most likely the reason to failure.
Are you able to share the card dump?  (sendspace.com it & paste link here)

Offline

#3 2017-08-29 06:24:56

Erictsk
Contributor
Registered: 2015-05-22
Posts: 39

Re: cloned Mifare Ultralight cant access hotel lift

I used a magic ultralight card. I did a comparison of both cards' contents and they are the same.

hopefully the link below works for you.

https://www.sendspace.com/file/i4fz1a

Offline

#4 2017-08-29 06:27:20

Erictsk
Contributor
Registered: 2015-05-22
Posts: 39

Re: cloned Mifare Ultralight cant access hotel lift

Perhaps this is better.

Contents shown below:

04 0b 34 b3
5a dc 3f 81
38 48 08 00
44 06 db 09
70 f1 8f 73
d7 2c eb d6
21 c3 38 64
94 b5 d6 37
a1 a1 57 5e
69 9a d1 6e
00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00

Thanks iceman

Last edited by Erictsk (2017-08-29 06:27:37)

Offline

#5 2017-08-29 07:05:15

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: cloned Mifare Ultralight cant access hotel lift

and the output from

hf 14a read
hf mfu info

Offline

#6 2017-08-29 07:26:43

Erictsk
Contributor
Registered: 2015-05-22
Posts: 39

Re: cloned Mifare Ultralight cant access hotel lift

Original card has been returned to hotel. Find below the result from the cloned version.

**** hf 14a read ****

ATQA : 00 44         
UID : 04 0b 34 5a dc 3f 81           
SAK : 00 [2]         
MANUFACTURER : NXP Semiconductors Germany         
TYPE : NXP MIFARE Ultralight | Ultralight C         
SAK incorrectly claims that card doesn't support RATS         
ATS : 0a 78 00 81 02 db a0 c1 19 40 2a b5           
       -  TL : length is 10 bytes         
       -  T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 8 (FSC = 256)         
       - TA1 : different divisors are supported, DR: [], DS: []         
       - TB1 : SFGI = 1 (SFGT = 8192/fc), FWI = 8 (FWT = 1048576/fc)         
       - TC1 : NAD is NOT supported, CID is supported         
       -  HB : db a0 c1 19 40           
Answers to chinese magic backdoor commands: NO         

**** hf mfu info ****
#db# Pages 4                 
#db# Pages read 4                 
-- Mifare Ultralight / Ultralight-C Tag Information ---------         
-------------------------------------------------------------         
MANUFACTURER : NXP Semiconductors Germany         
         UID : 04 0b 34 5a dc 3f 81           
        BCC0 : b3 - Ok         
        BCC1 : 38 - Ok         
    Internal : 48           
        Lock : 08 00  - 0000000000001000         
  OneTimePad : 44 06 db 09           
enc(RndB):89 b0 7b 35 a1 b3 f4 7e           
     RndA  :01 01 01 01 01 01 01 01           
     e_RndB:89 b0 7b 35 a1 b3 f4 7e           
     RndB:49 7c ce 32 a6 96 02 19           
     RA+B:01 01 01 01 01 01 01 01 7c ce 32 a6 96 02 19 49           
enc(RA+B):94 ca 64 7e 5d c0 1f 84 36 50 13 2b 3c 77 15 95           
enc(RndA'):82 63 e0 f4 d5 3c 90 90           
Seems to be a Ultralight -C

Offline

#7 2017-08-29 07:43:36

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: cloned Mifare Ultralight cant access hotel lift

So you seem to have a Ultralight-C card,  with a 3des key,  which you haven't copied.   And this would be the reason to why your cloned card doesn't work.

Offline

#8 2017-08-29 07:56:52

Erictsk
Contributor
Registered: 2015-05-22
Posts: 39

Re: cloned Mifare Ultralight cant access hotel lift

Thanks ya. I will look into that.
Will post next question if I cant figure out. Thanks a lot.

Last edited by Erictsk (2017-08-29 07:58:14)

Offline

Board footer

Powered by FluxBB