Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello all,
im new to pm3 and this community.
i got a pm3 with bootrom, os and fpga from svn revision 52.
i started trying to hi14asnoop, hi14alist a read-session between a OpenPCD and mifare classic card with default keys.
the openPCD software could read all data. But trying to hi14alist and get the sniffing results out of the pm3 always results in the same: the software on windows freezes and there is no result printed at all.
i build an antenna which serves with 10,38V on 13,25MHz.
i tried software and bootrom, os and fpga-images from revisions 52, 216, 412 and the latest as of now 426.
i have cross compiled them with the elf and eabi cross-compiler respectively. (arm-eabi toolchainw as taken from http://github.com/jsnyder/arm-eabi-toolchain)
my intend is to sniff a whole mifare-classic sector read, but im failing at reading the information out of the pm3.
can someone of u help me? i can provide more information if needed.
Last edited by xerxesmc (2010-03-07 17:58:04)
Offline
shame on me, but i kinda didnt figure all the time to cancel the snoop by pressing the button on the pm3.
works now...
Offline
Pages: 1