Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-12-28 14:52:57
- kyriezolo
- Contributor
- Registered: 2017-12-28
- Posts: 1
Hello, I have issues with flashing
I just got a Proxmark3 "easy" v3, and I think I messed up with flashing the firmware. I'm using Arch Linux 64-bit. Basically:
The git flasher didn't recognise the device.
The AUR proxmark3 package flasher did work, and I flashed the fullimage.elf of the git source.
Now when I plug the pm3 again, the green and red lights come on, and every few seconds the blue and yellow lights also blink once. I can reflash the image, however the pm3 apparently is stuck in this (flash?) mode.
How can I flash a working firmware on it?
Offline
#2 2018-01-03 20:31:39
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hello, I have issues with flashing
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed