Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2018-05-05 16:05:37
- gerza
- Contributor
- Registered: 2018-05-05
- Posts: 14
¿is possible update windows gui for last iceman fork?
I'm an amateur and I recently bought PM3 easy. first I changed the original firmware for the iceman fork.
works perfect with mifare_autopwn.lua script . hardnested command is true great too
I wish to thank iceman for his hard work
but there is not a gaucho compiled gui for windows updated. I try old version but don't work with last iceman fork
¿is possible compile and update windows gui for last iceman fork?
on the other hand, there are a old chineese gui (2016) for easy use but... I'm not try because is in chineese languaje
if anybody want try this chineese software tell me
Greetings to all
Offline
#2 2018-05-05 17:56:25
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: ¿is possible update windows gui for last iceman fork?
This is the introduction,
your access rights has been updated, please post in relevant category instead.
Offline
Pages: 1
Topic closed