Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2010-05-24 15:50:57

roteno
Member
Registered: 2010-03-05
Posts: 5

Sample Rates

I have just started to look closer at the PM3 design and I'm curious about the sample rates. 

Can someone a little closer to the design help me out? 

What sample rates are used for LF and HF tags? How often do you guys find the need to vary the sample rate to achieve an integer multiple of the data rate for different tags? (Perhaps never if all the data rates are derived from a divided down reference at Fc)

Thanks a bunch for reading.

Offline

#2 2010-05-28 04:30:13

roteno
Member
Registered: 2010-03-05
Posts: 5

Re: Sample Rates

Found my answer so I thought I would share:

The sample rate typically is tied to the carrier frequency (re: 13.5Msps @ HF | 125ksps @ LF).

This has the added benefit of aliasing any remaining carrier to DC and 2xFc.

Sub-carriers and data rates are based on the reference carrier frequency so I will unlikely need to vary my sample rate.

Thanks for reading.

Offline

Board footer

Powered by FluxBB