Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
- Index
- » Introductions
- » Hello.
Pages: 1
Topic closed
#1 2018-07-25 10:14:50
- www
- Contributor
- Registered: 2018-07-25
- Posts: 9
Hello.
I'm joining with my shiny new PM3 RDV4
proxmark3> hw version
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument
bootrom: master/v3.0.1-379-gb2e0ac5-suspect 2018-07-25 07:58:59
os: master/v3.0.1-379-gb2e0ac5-suspect 2018-07-25 07:58:33
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59
uC: AT91SAM7S512 Rev A
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 197296 bytes (38%). Free: 326992 bytes (62%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash MemoryI have also a RDV3 from Elechouse, but the new device is soo tinyyyyyyy it's cute
Offline
#2 2018-07-25 11:36:40
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: Hello.
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed
- Index
- » Introductions
- » Hello.