Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2018-10-30 15:33:04
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
HELP:NewBuildingSwipeCard with data sample and file.pm3
Hi everyone,
a new building with lf card bur not susscessful with lf search
so I have done lf data samples, lf data save filename and upload to here
https://drive.google.com/file/d/1vRhMHnoL_-O5MulI9y-Q-dr-mlP2dXSb/view?usp=sharing
i am grateful if someone can guide me....
BR
Yukihama
Offline
#2 2018-11-06 19:17:17
- burma
- Contributor
- Registered: 2018-07-28
- Posts: 13
Re: HELP:NewBuildingSwipeCard with data sample and file.pm3
your file is empty; make sure you do something like lf read before saving (and then verify that the file is not empty by using data plot)
Offline
#3 2018-11-06 21:04:47
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: HELP:NewBuildingSwipeCard with data sample and file.pm3
The process for collecting LF signal data is as following.
data plot
lf read
data save xxxx.pm3Offline