Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2018-11-16 15:46:32
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
[SOLVED]:An unknon Low Frequency Tag.
help:An unknon Low Frequency Tag.
I just got an low frequency stick tag for door and lift. No result for lf search. so I run lf search u and got results below:
Thanks
Last edited by yukihama (2018-11-20 16:24:46)
Offline
#2 2018-11-16 16:40:18
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: [SOLVED]:An unknon Low Frequency Tag.
for starters, you need to set a proper block 0 (config block)
Offline
#3 2018-11-16 22:31:05
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
Re: [SOLVED]:An unknon Low Frequency Tag.
for starters, you need to set a proper block 0 (config block)
Thanks Guru Iceman,I know I need to config block 0 properly and manually,but I am so stupid dont know how to withou knowing what protocle this card is. I check the T55xx reference and try config but failed several times, I am a loser...T_T
Offline
#4 2018-11-17 11:39:10
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: [SOLVED]:An unknon Low Frequency Tag.
...you wrote it was psk1
0xFFFF has a easy block calculator for T55X7 , http://cardinfo.barkweb.com.au/index.ph … =19&sub=29
Offline
Pages: 1