Proxmark3 community

tp

Contributor

Registered: 2019-04-05

Posts: 4

User of original Pm3, just go RDV4.0....

I have used the original PM3 for awhile now ( clone's hid to my t55x7 fobs just great ) , and just decided to get the RDV4.0 since it would be easier to carry, without the external antennas.   But.... I can't seem to clone lf hid cards...  Just says starting to clone now.    I have tried latest rfidresearchgroup rvd4.0 codebase, proxmark 3.1.0 official, all with the same results.   Think this looks like something with the lf antenna.   So I am looking for some help to see if this is known issue, something I can do about it, etc.

Prob will need to post this again in the right place

Keep iceman fork alive with a donation!           https://paypal.me/iceman1001/
MONERO: 43mNJLpgBVaTvyZmX9ajcohpvVkaRy1kbZPm8tqAb7itZgfuYecgkRF36rXrKFUkwEGeZedPsASRxgv4HPBHvJwyJdyvQuP

[=] UART Setting serial baudrate 460800

[ Proxmark3 RFID instrument ]

[ CLIENT ]
  client: iceman build for RDV40 with flashmem; smartcard;

[ ARM ]
bootrom: iceman/master/ad97aa3d 2019-04-04 23:14:42
      os: iceman/master/ad97aa3d 2019-04-04 23:14:58

[ FPGA ]
LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23

[ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 242592 bytes (46%) Free: 281696 bytes (54%)
  --= Second Nonvolatile Program Memory Size: None
  --= Internal SRAM Size: 64K bytes
  --= Architecture Identifier: AT91SAM7Sxx Series
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

pm3 --> hw tune

[=] measuring antenna characteristics, please wait...

....

[+] LF antenna: 71.38 V - 125.00 kHz
[+] LF antenna: 40.65 V - 134.00 kHz
[+] LF optimal: 71.38 V - 125.00 kHz
[+] LF antenna is OK

[+] HF antenna: 50.14 V - 13.56 MHz
[+] HF antenna is OK

[+] Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.

pm3 --> lf hid read 1
[+] HID Prox TAG ID: 1cca045443 (10953) - Format Len: 37bit - FC: 52384 - Card: 142025
pm3 --> lf hid clone 1cca045444
[=] Preparing to clone HID tag with ID 1cca045444

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: User of original Pm3, just go RDV4.0....

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Your access rights has been updated.