Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi, guys! I think I fucked up. I tried to flash firmware, did everything right but release the button before the process was completed. Terminal said "Process was interrupted bla bla". Now rdv4 is't undetectable. The only C and A is glowing. Press the button and connect gives nothing. I really bricked it? What is the simplest way to fix it?
Thank you!
Offline
Hi N0nsens,
No worries happened to me a week ago and I'll help you.
Which operating system do you use ???
And what repo did you want to flash?
Greeting
Chris
Last edited by Riffruepel (2019-04-28 08:57:13)
Offline
Thank you for reply Riffruepel!
I'm using a Mojave OS X & https://github.com/Proxmark/proxmark3
thank you!
Offline
Will the Proxmark3 RDV 40 still be recognized as Proxmark?
And how many LED's are lit on Proxmark ???
What does the command tell you?
system_profiler SPUSBDataType
Chris
Last edited by Riffruepel (2019-04-28 16:21:42)
Offline
Will the Proxmark3 RDV 40 still be recognized as Proxmark?
And how many LED's are lit on Proxmark ???
What does the command tell you?system_profiler SPUSBDataType
Chris
There is no Proxmark in the list. It's undetectable anymore.
the only Power LEDs is on & C led and A are growing.
Offline
Then you shot the bootloader. !!!
No problem,
You need the following things for the really easy way:
Segger J-LINK V8
https://lab401.com/collections/flashing-tools/products/segger-j-link-v8
Proxmark 3 RDV J-Link Adaptor
https://lab401.com/collections/flashing-tools/products/proxmark-3-rdv-j-link-adaptor
and
Proxmark 3 RDV4 - Flashing Support
https://lab401.com/products/proxmark-3-rdv4-flash-support
Get the things are not expensive. Write me again then I'll help you with the rest.
Greeting
Chris
Offline
Then you shot the bootloader. !!!
No problem,You need the following things for the really easy way:
Segger J-LINK V8
https://lab401.com/collections/flashing-tools/products/segger-j-link-v8Proxmark 3 RDV J-Link Adaptor
https://lab401.com/collections/flashing-tools/products/proxmark-3-rdv-j-link-adaptorand
Proxmark 3 RDV4 - Flashing Support
https://lab401.com/products/proxmark-3-rdv4-flash-supportGet the things are not expensive. Write me again then I'll help you with the rest.
Greeting
Chris
Thank you so much for your help! I’ve already ordered the “BusPirate” will it work in my case?
Offline
The works also have unfortunately only experience with the Jegger.
get in touch with how it turned out.
https://github.com/Proxmark/proxmark3/wiki/Debricking-Proxmark3-with-buspirate
Gruss
Chris
Last edited by Riffruepel (2019-04-28 18:20:29)
Offline
The only problem I still see because the JTAG connections in the RDV 40 are very small without that Proxmark 3 RDV4 - Flashing Support.
But try it :-)
Offline