Proxmark3 community

PlayGround

Contributor

Registered: 2019-05-08

Posts: 10

Proxmark Easy and Iceman Fork from Github?

Hello,

i have a proxmark easy (i believe some china stuff, but with AT91SAM7S512 means 512k).

./proxmark3 /dev/ttyACM0
Prox/RFID mark3 RFID instrument          
bootrom: master/v3.1.0-83-g1f61f19-suspect 2019-04-09 10:39:27
os: master/v3.1.0-83-g1f61f19-suspect 2019-04-09 10:39:28
fpga_lf.bit built for 2s30vq100 on 2015/03/06 at 07:38:04
fpga_hf.bit built for 2s30vq100 on 2019/03/20 at 08:08:07
SmartCard Slot: not available
          
uC: AT91SAM7S512 Rev B          
Embedded Processor: ARM7TDMI          
Nonvolatile Program Memory Size: 512K bytes. Used: 209316 bytes (40%). Free: 314972 bytes (60%).          
Second Nonvolatile Program Memory Size: None          
Internal SRAM Size: 64K bytes          
Architecture Identifier: AT91SAM7Sxx Series          
Nonvolatile Program Memory Type: Embedded Flash Memory          

my question is, can i flash that device with the firmware of the iceman fork?
if that is possible i would use the docs from here:
https://github.com/iceman1001/proxmark3 --> Setup and build for UBUNTU

There is no need to run the Coverity Scan Config & Run - Part, right?

by the way: the part
"Install the blacklist rules and add user to dialout group "

could be more detailed. Please see my change request.

Install the blacklist rules:

sudo cp -rf driver/77-mm-usb-device-blacklist.rules /etc/udev/rules.d/77-mm-usb-device-blacklist.rules
sudo udevadm control --reload-rules

Add user to dialout group. If you do this one, you need to logout and login in again to make sure your rights got changed.

sudo adduser $USER dialout

just to make it a bit clearer. i did a changerequest, but i am not sure if this is working correct. please be polite if not.

best regards

Paul

PS: thanks for all the time you all spend here to make great things.

Last edited by PlayGround (2019-05-09 12:27:52)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Proxmark Easy and Iceman Fork from Github?

No need to run coverty,  that is for those who develop

PlayGround

Contributor

Registered: 2019-05-08

Posts: 10

Re: Proxmark Easy and Iceman Fork from Github?

hello iceman, thanks for the reply.
one more question: is it possible to use the iceman-fork on a proxmark easy?

thank you and have a nice weekend

paul

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Proxmark Easy and Iceman Fork from Github?

No problem at all.

PlayGround

Contributor

Registered: 2019-05-08

Posts: 10

Re: Proxmark Easy and Iceman Fork from Github?

works fine, i flashed the firmware with the guide on github in your repo successfully. Just to let you know the results. thank you for your help.