Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-08-23 02:23:47
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Writing the bin file
Hi
I am using Iceman bootrom
after dumping all the blocks.Pm3 Generates 3 different file, ( Binary / text/ jason) .
I am trying to write binary file that was created to a new UId / Cuid /Fuid tag,
But the commands that I use , do not work
Can you please let me know of the exact command that I need to dump / Write the file into the UID or CUID tags.
Thank you
Offline
#2 2019-08-23 02:31:51
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: Writing the bin file
if the file name that is generated is " hf-mf-d23f4c58-data.bin "
is the command " hf mf cload d23f4c58 "
Thank you
Offline
#3 2019-08-23 14:25:42
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Writing the bin file
...cload takes the name of the file...
Offline
#4 2019-08-23 16:44:48
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: Writing the bin file
Hi,
Sorry Iceman, I am still confused, can you please write it out as you would enter in PM3,
Do you mean.: hf mf cload d23f4c58-data.bin
As always , very thankful for your support
Cheers
Offline
Pages: 1