Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
When running 'hf iclass sim 2' against an HID Omnikey 5321V2 reader, I am getting
#db# Unhandled command (len = 5) received from reader: 26 01 00 f6 0aDoes anyone have an idea what the reader command 0x26 is? And what is the expected tag response?
Offline
Looks like the reader is attempting to access the Application Directory. Length is 01. Data is null. Checksum.
Response should 8 bytes IIRC.
Offline
Wouldn't that be achieved by simple read to block 5 (0c 05)?
Offline
Is it possible that this is the ISO15693 standard INVENTORY command? Are iCLASS cards supposed to respond to that? Standard answer would be the (non rotated) ID then?
Offline
Wouldn't that be achieved by simple read to block 5 (0c 05)?
It's a command. It exists. ¯\_(ツ)_/¯
All I was looking for was iClass and 0x26. Not much to go on really.
Identify - 0x26 0x01 mask_bit_length
mask_bit_length is typically 0 in this case I think.
This function returns an enum as part of a Find or Anticollision operation.
Should be responding with 12 bytes.
Tx & Rx CRC flags - 06 00?
Protocol - ISO15693 - 01
CSN - 8 bytes.
Offline
Pages: 1