Proxmark3 community

garbo500

Contributor

Registered: 2019-12-09

Posts: 1

New User/ Penetration Tester

Hi guys,

For the past 12 months I have been conducting physical penetration tests and gaining entry by social engineering, tailgating and producing duplicate staff cards. However, I now need to try and take things to a new level and attempt entry via RFID cloning.

I am not really tech minded but can usually learn and am prepared to read any literature/posts to achieve a working knowledge.

My main question before I purchase the Proxmark is whether it still has a high success rate of cloning RFID cards that will correctly
handshake with the security proximity scanners in this day of high encryption with some systems.

The access control system I am trying to defeat is a Paxton security access control gates where most likely a 125khz proximity card is used.

I would be looking to purchase with a Proxmark 3 or Proxmark Pro if either of these products had any chance of achieving my objective.

Thanks for allowing me to use your forum and any assistance will be much appreciated.

Mark

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: New User/ Penetration Tester

Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.

Your access rights has been updated.