Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-12-25 14:42:12
- udihakim
- Contributor
- Registered: 2019-12-25
- Posts: 2
Bricked RDV4 - Wrong bootloader address?
Hi All,
It seems like i've bricked one of my Proxmarks RDV4.
My HW has only one Xilinx chip, it's missing the AT91.
I connected the JTAG header to a JLINK and everyting works smoothly, after I finished programming the bootloader to 0x00100000 I am getting an error on my USB device "Unknown USB Device (Device Descriptor Request Failed)".
I would like to know if the bootloader stayed at the address (0x00100000) after the HW moved to the single chip design?
To me it seems like I am writing the bootloader to the wrong address...
Last edited by udihakim (2019-12-25 14:45:18)
Offline
#2 2019-12-25 16:10:21
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Bricked RDV4 - Wrong bootloader address?
Did you follow the jtag instructions?
https://github.com/RfidResearchGroup/pr … g_notes.md
Since you have jtag possibilities you can revive your device.
Offline