Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-01-28 13:13:50
- Picklerick
- Contributor
- Registered: 2020-01-28
- Posts: 2
Ahoy Mateys!
I have come in the search of wisdom! I have been playing with NFC for a couple years now. It all started when my boss asked me if I could clone an RFID card. Thinking "how hard could this be?" I said "SURE!". Well nearly 5 years, 2 proxmark3 Easys (of course I bricked the first one), a Segger, a PM3 Evolution, a RDV4 in transit, an ACR122U, a Chameleon REV/E, COUNTLESS chinese knockoff card readers, hundreds of blank cards and fobs, I have still not accomplished my goal but in turn got hooked on NFC. Of course I was able to clone the card but the function we were hoping for was not achieved.
I will be posting in the Mifare Classic section chiefly, but most likely will be all over the place.
Offline
#2 2020-01-28 16:49:43
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Ahoy Mateys!
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed