Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2011-05-20 02:51:41

Michael
Member
Registered: 2011-03-28
Posts: 3

firmware problem help

Hi

  I have download the bootrom program into ARM, and the computer recognize it as a HID-Compliant device, but can not download fpgaimage.s19 file, can anyone help me ? thx.

It display:

bad ACKd = 00002100 flush, c.ext1 = 00002000

why?

Offline

#2 2011-05-20 02:53:39

Michael
Member
Registered: 2011-03-28
Posts: 3

Re: firmware problem help

added:

    when I enter prox gui command, it can open the client program.

Offline

#3 2011-10-19 10:46:41

Cex
Contributor
Registered: 2009-12-14
Posts: 104

Re: firmware problem help

FLASHER uses .ELF images, not .S19 (which can be programmed using JTAG).

Try sending .ELF file instead of .S19 (you should have both in your OBJ folder).

Regards.

Offline

Board footer

Powered by FluxBB