Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-03-16 22:49:14
- merdenoms
- Contributor
- Registered: 2020-03-16
- Posts: 3
Hi, I'm new.
I'm into all things hacking. I use Linux, build everything in Docker, program in Python(not that good), and mess with microcontrollers.
I bought the RDV4 thinking it would be simple to use. I had issues with the outdated firmware and I immediately bricked it. haha I had to wait month for a break out board that fits the small pins.
Then I spent hours trying to debrick using the Bus Pirate. I had no luck with that. Everything I tried failed. All V6.x firmware failed and I would get a code error when compiling v7.x.
I was finally able to use my Raspberry Pi 4 and debrick the RDV4. I'm now having fun and learning about different RFID chips!
Offline
#2 2020-03-17 00:15:05
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi, I'm new.
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed