Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-08-10 14:54:11
- xugmu
- Contributor
- Registered: 2016-06-22
- Posts: 24
I can not read or write unsecured picopass 2k
I put it here because I find the site more like a picopass card 2k
I have bought several 2k picopass cards to try out and the only thing I have achieved so far is to read blocks 0,1 and 2
hf iclass readblk b 00
warning: no authentication used with read, only a few specific blocks can be read accurately without authentication.
CSN: 30 29 95 04 08 00 12 e0
Block 00: 30 29 95 04 08 00 12 e0
Block 01: ff ff ff ff 7f 1f ff ac
Block 02: fe ff ff ff ff ff ff ff As far as I'm talking about an unsecured card, where we could read and write any position except block 0. However, except blocks 0, 1 and 2, all other readings give me ffffffffffffffff. The attempts of writing, of course everything indicates that they are null
This tells me hf iclass reader 0:
CSN: 30 29 95 04 08 00 12 e0
CC: fe ff ff ff ff ff ff ff
Mode: Personalization [Programmable]
Coding: ISO 14443-2 B/ISO 15693
Crypt: Secured page, keys not locked
Crypt: Non secured page
RA: Read access not enabled
Mem: 2 KBits/2 App Areas (31 * 8 bytes) [1F]
AA1: blocks 06-FF
AA2: blocks 100-1F
AppIA: ff ff ff ff ff ff ff ff And this is the command hf list raw after hf search
Recorded Activity (TraceLen = 183 bytes)
Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer
iso14443a - All times are in carrier periods (1/13.56Mhz)
iClass - Timings are not as accurate
Start | End | Src | Data (! denotes parity error) | CRC | Annotation |
------------|------------|-----|-----------------------------------------------------------------|-----|--------------------|
0 | 0 | Rdr | 0a | |
432 | 432 | Tag | 0f | |
432 | 432 | Rdr | 0c | |
3488 | 3488 | Tag | 26 a5 92 00 01 40 02 1c 27 70 | |
3488 | 3488 | Rdr | 81 26 a5 92 00 01 40 02 1c | |
6544 | 6544 | Tag | 30 29 95 04 08 00 12 e0 cf 67 | |
6544 | 6544 | Rdr | 88 02 | |
9088 | 9088 | Tag | fe ff ff ff ff ff ff ff | |
9088 | 9088 | Rdr | 0c 01 fa 22 | |
12144 | 12144 | Tag | ff ff ff ff 7f 1f ff ac 3b b1 | |
12144 | 12144 | Rdr | 0c 05 de 64 | |
15200 | 15200 | Tag | ff ff ff ff ff ff ff ff ea f5 | | this is my proxmark
ootrom: iceman/master/v1.1.0-2055-g4d189095 2017-06-27 11:15:40
os: master/v2.2.0-520-g7f2114d-suspect 2017-06-24 10:36:07
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/05/17 at 17:48:26
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 192473 bytes (73%). Free: 69671 bytes (27%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory Thank you
Last edited by xugmu (2017-08-10 15:23:54)
Offline
#2 2017-08-14 07:59:13
- brantz
- Contributor
- Registered: 2014-03-19
- Posts: 50
Re: I can not read or write unsecured picopass 2k
Have you tried to read blk 06-09? what's the response?
Offline
#3 2017-08-14 21:19:53
- xugmu
- Contributor
- Registered: 2016-06-22
- Posts: 24
Re: I can not read or write unsecured picopass 2k
proxmark3> hf iclass readblk b 06
warning: no authentication used with read, only a few specific blocks can be read accurately without authentication.
CSN: 30 29 95 04 08 00 12 e0
Block 06: ff ff ff ff ff ff ff ff
proxmark3> hf iclass readblk b 07
warning: no authentication used with read, only a few specific blocks can be read accurately without authentication.
CSN: 30 29 95 04 08 00 12 e0
Block 07: ff ff ff ff ff ff ff ff
proxmark3> hf iclass readblk b 08
warning: no authentication used with read, only a few specific blocks can be read accurately without authentication.
CSN: 30 29 95 04 08 00 12 e0
Block 08: ff ff ff ff ff ff ff ff
proxmark3> hf iclass readblk b 09
warning: no authentication used with read, only a few specific blocks can be read accurately without authentication.
CSN: 30 29 95 04 08 00 12 e0
Block 09: ff ff ff ff ff ff ff ff The readings may be correct (after all it is an unpersonalized empty card), the problem is that I can not write to the card to confirm it
I probed with the two keys that come by default in iclass_serial_protocol but I still can not write in a card that is supposed to be unsecured
Offline
#4 2017-08-21 04:16:36
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: I can not read or write unsecured picopass 2k
Afaik, Picopass chips require authentication. Unsecured may mean the card still uses the picopass default keys. But you will need to get a successful authentication to read or write any block past 2
Offline
#5 2020-06-25 00:49:15
- xugmu
- Contributor
- Registered: 2016-06-22
- Posts: 24
Re: I can not read or write unsecured picopass 2k
Could someone help me to know if what I have is a 2k or 2ks credential?
Thank you
Last edited by xugmu (2020-07-26 18:57:06)
Offline
#6 2020-07-30 23:40:07
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: I can not read or write unsecured picopass 2k
With my recent findings, I would say your picopass is configured in non-secure-pagemode. And also as programmable mode.
Offline
#7 2020-07-31 00:25:17
- xugmu
- Contributor
- Registered: 2016-06-22
- Posts: 24
Re: I can not read or write unsecured picopass 2k
That's right. Everything I have done with these cards so far has been in non secure mode.
I hope to keep going and learn how keys are used
Offline
#8 2020-08-02 01:19:28
- xugmu
- Contributor
- Registered: 2016-06-22
- Posts: 24
Re: I can not read or write unsecured picopass 2k
Hello, I am trying to start with the topic of keys and it had occurred to me to write two keys in positions 3 and 4 of an uninitialized picopass card.
In the memory of the reader it is supposed that the permutated key must be. The doubt is that I must write in positions 3 and 4 or, rather, what key do I have to diversify to write it in those positions, the permutated key or the key without permute?
I have few blank cards and I hope I am not mistaken
Last edited by xugmu (2020-08-02 10:31:03)
Offline
Pages: 1