Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-08-27 17:29:08
- Locksmith2020
- Contributor
- Registered: 2020-08-27
- Posts: 3
Hi-Proxmark3 RDV4
Hi.
I have bought the latest proxmark complete package RDV4, with BT addon etc. I have used this link to set up the client environment and driver on my PC which is running windows 10 64x: https://github.com/Proxmark/proxmark3/wiki/Windows#requirements.
I got up to step 10 and ran the runme64 file and the terminal downloaded repos and updated without any issues, i then exited and ran again, and i now see this:
mkdir: cannot create directory '/pm3': File exists
/pm3 could not be created.
Setting HOME to /tmp.
pm3 ~$
and when i try to run step 11 i get this:
mkdir: cannot create directory '/pm3': File exists
/pm3 could not be created.
Setting HOME to /tmp.
pm3 ~$ "make clean && make all"
bash: make clean && make all: command not found
pm3 ~$ make clean && make all
make: *** No rule to make target 'clean'. Stop.
pm3 ~$
Could i please have some help in regards to this so i can connect to my proxmark, the proxmark driver needed is already installed onto my PC.
Kind Regards.
Offline
#2 2020-08-27 18:20:10
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi-Proxmark3 RDV4
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Ps.
don't spam post, showing that you didn't care reading the rules when creating your account.
Offline
Pages: 1
Topic closed