Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-09-01 22:53:05

blu3rats
Contributor
Registered: 2020-08-11
Posts: 4

Unable to read or change UID Mifare 1k

I keep getting the Card doesn't support standard iso14443-3 anticollision ATQA: 00 00 error.

I have tried "hf mf cwipe -u 09080706 -a 0004 -s 18" says its successful but no change.
I have tried "hf mf csetuid 01020304 0004 08 w" also says its successful but no change.
I have tried the remagic.lua script once again says it successful but no change.

I can go on but I will spare you here is my  read and list.

[usb] pm3 --> hf 14a read
[=] Card doesn't support standard iso14443-3 anticollision
[+] ATQA: 00 00

[usb] pm3 --> hf 14a list
[=] downloading tracelog data from device
[+] Recorded activity (trace len = 21 bytes)
[=] start = start of start frame end = end of frame. src = source of transfer
[=] ISO14443A - all times are in carrier periods (1/13.56MHz)

      Start |        End | Src | Data (! denotes parity error)                                           | CRC | Annotation
------------+------------+-----+-------------------------------------------------------------------------+-----+--------------------
          0 |        992 | Rdr |52(7)                                                                    |     | WUPA
       2100 |       4468 | Tag |00  00                                                                   |     |
[usb] pm3 -->


Any help would be greatly appreciated

Thank you

Offline

#2 2020-09-02 05:07:50

iceman
Administrator
Registered: 2013-04-25
Posts: 9,538
Website

Re: Unable to read or change UID Mifare 1k

The second one I heard of within a week.... 
What is this for tag?  You got a picture?

The one I heard of before was a DT impant.

Offline

#3 2020-09-02 19:38:24

blu3rats
Contributor
Registered: 2020-08-11
Posts: 4

Re: Unable to read or change UID Mifare 1k

iceman wrote:

The second one I heard of within a week.... 
What is this for tag?  You got a picture?

The one I heard of before was a DT impant.

Unfortunately its the same exact tag with the same exact problem. I have gone through everything Jirvin was told to do here and over at Dangerous Things. With the exact same results. The upside is I have learned a whole lot about using my proxmark. I love this thing smile

Last edited by blu3rats (2020-09-02 19:46:07)

Offline

#4 2020-09-02 21:10:18

iceman
Administrator
Registered: 2013-04-25
Posts: 9,538
Website

Re: Unable to read or change UID Mifare 1k

It's a deep rabbit hole to fall into

Offline

Board footer

Powered by FluxBB