Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-12-17 17:21:01
- M_T
- Contributor
- From: London
- Registered: 2020-12-17
- Posts: 1
My Introduction (and something I might be able to help with)
I've got a PM3 RDV4, and I'm hoping to learn a bit about how I can better use my proxmark.
Given how there are tons of links to this forum, I'm hoping it has some useful resources.
I don't think I have the right skills, but if I do, I'll try and contribute in whatever way I can.
I might be able to help with the PM3 discord though, as I have quite a lot of experience managing technical discord servers.
Also:
I've been trying to find a valid link to the proxmark3 discord server.
The ones on reddit are expired.
The ones posted by @herrmann1001 on discord are invalid.
The one on the proxmark3 firmware repo readme is invalid.
Hopefully there's a valid one somewhere on this forum.
Offline
#2 2020-12-17 17:49:34
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: My Introduction (and something I might be able to help with)
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
#3 2020-12-17 18:11:05
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: My Introduction (and something I might be able to help with)
The links has been updated
Offline
Pages: 1
Topic closed