Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2011-07-29 20:35:20
- nadgob
- Member
- Registered: 2011-07-26
- Posts: 3
LEDs never light up! Is this normal?
Got a 2nd hand board on eBay which appeared to be an original virgin (?) Proxmark3 board.
Re-flashed the board using JTAG, re-flashed bootloader, fpga and os.
Can access the board via "prox.exe" and run "version" and "tune" commands.
> version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 486 2011-07-28 18:30:43
#db# os: svn 486-unclean 2011-07-28 19:03:33
#db# FPGA image built on 2009/ 8/28 at 23:49:10
However ... none of the LEDs light up, not when I connect the board to the USB port nor when it boots into OS.
In fact, I've never seen any of the LEDs to light up on my board.
Is this normal?
Please, advise.
Offline
#2 2011-07-31 06:36:18
- vivat
- Contributor
- Registered: 2010-10-26
- Posts: 332
Re: LEDs never light up! Is this normal?
Can access the board via "prox.exe"
You need to run client from SVN 486
Offline
#3 2011-07-31 15:20:19
- nadgob
- Member
- Registered: 2011-07-26
- Posts: 3
Re: LEDs never light up! Is this normal?
Can access the board via "prox.exe"
You need to run client from SVN 486
Compiled SVN 486 under Ubuntu 11.04.
Used newly compiled flasher to flash bootrom, fpga and os.
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 486-unclean 2011-07-31 13:52:59
#db# os: svn 486-unclean 2011-07-31 13:53:01
#db# FPGA image built on 2009/12/ 8 at 8: 3:54
Still no LEDs light on the board. Did I miss something?
Thanks in advance!
P.S Logs from the flasher
ubuntu:~/proxmark3$ sudo ./client/flasher -b bootrom/obj/bootrom.elf
Loading ELF file 'bootrom/obj/bootrom.elf'...
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00001618->0x00001618) [R X] @0x294
Waiting for Proxmark to appear on USB..........
Connected units:
1. SN: ChangeMe [003/061]
Found.
Flashing...
Writing segments for file: bootrom/obj/bootrom.elf
0x00100000..0x001001ff [0x200 / 2 blocks].. OK
0x00100200..0x00101817 [0x1618 / 23 blocks]....................... OK
Resetting hardware...
All done.
Have a nice day!
ubuntu:~/proxmark3$ sudo ./client/flasher -b bootrom/obj/bootrom.elf
Loading ELF file 'bootrom/obj/bootrom.elf'...
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00001618->0x00001618) [R X] @0x294
Waiting for Proxmark to appear on USB..........
Connected units:
1. SN: ChangeMe [003/061]
Found.
Flashing...
Writing segments for file: bootrom/obj/bootrom.elf
0x00100000..0x001001ff [0x200 / 2 blocks].. OK
0x00100200..0x00101817 [0x1618 / 23 blocks]....................... OK
Resetting hardware...
All done.
Have a nice day!
ubuntu:~/proxmark3$ sudo ./client/flasher armsrc/obj/fullimage.elf
Loading ELF file 'armsrc/obj/fullimage.elf'...
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x0000a4bc->0x0000a4bc) [R ] @0xb4
1: V 0x00110000 P 0x00110000 (0x0000fa30->0x0000fa30) [R X] @0xa570
2: V 0x00200000 P 0x0011fa30 (0x00001d00->0x00001d00) [RWX] @0x19fa0
Note: Extending previous segment from 0xfa30 to 0x11730 bytes
Waiting for Proxmark to appear on USB...
Connected units:
1. SN: ChangeMe [003/067]
Found.
Entering bootloader...
(Press and release the button only to abort)
Waiting for Proxmark to reappear on USB....
Connected units:
1. SN: ChangeMe [003/068]
Found.
Flashing...
Writing segments for file: armsrc/obj/fullimage.elf
0x00102000..0x0010c4bb [0xa4bc / 165 blocks]...................................
................................................................................
.................................................. OK
0x00110000..0x0012172f [0x11730 / 280 blocks]..................................
................................................................................
................................................................................
................................................................................
...... OK
Resetting hardware...
All done.
Have a nice day!
Offline
#4 2011-08-01 10:18:06
- vivat
- Contributor
- Registered: 2010-10-26
- Posts: 332
Re: LEDs never light up! Is this normal?
nadgob
Can you give a link where did you bought your board?
Offline
#5 2011-08-01 11:24:43
- nadgob
- Member
- Registered: 2011-07-26
- Posts: 3
Re: LEDs never light up! Is this normal?
nadgob
Can you give a link where did you bought your board?
Got it on eBay sometime in March, the link already expired.
Previous owner got it from UK.
cheers.
Offline