hallo i want to flash rdv4.01 what is last client in linux & windows

zissilia · 2021-02-04 20:31:31

hallo i need help 3 months ago i bought it but i flashed when i try to change client from linux to windows and is stuck in boot , after 3 months i have the jtag and i need to make work, i prefer windows client what is latest versions in windows and linux firmwares ? and what is better ?

Last edited by zissilia (2021-02-04 20:38:38)

gator96100 · 2021-02-04 21:54:00

1. I highly doubt you managed to brick for Proxmark
2. From your old post I can tell you probably never got your Proxmark running properly
3. The latest firmware is always found at https://github.com/RfidResearchGroup/proxmark3
4. When flashing did you try the button method?
5. For Windows you can check https://www.proxmarkbuilds.org/ for the Windows prebuilds and known errors
6. The Windows and Linux client work exactly the same, it depends on what OS the user prefers

iceman · 2021-02-04 22:12:36

There is quite many different guides out there in the net. Not everyone is up-to-date, not all of them targets the fw/client you want to use. Gator's site is maintained and up-to-date for when you are using the Proxspace mingw-based enviroment.

For RRG/Iceman , https://github.com/rfidresearchgroup/pr … d-overview
You find installation guides that are up-to-date for the repository for different OS.

You will find the similar how to install on official Proxmark3 repository https://github.com/Proxmark/proxmark3 where the Wiki contains the instructions needed. You can find a link to the wiki on top of this forum page together with other links.

All of these instructions comes from the wish of making it easier to start with Proxmark3. It might have had the opposite effect for the new comer being now flooded with information, blogs, videos,... Where as some years ago it was scarce.

zissilia · 2021-02-04 23:48:39

no i made many posts before http://www.proxmark.org/forum/search.php?action=show_replies
but now i did new cause the administrator iceman he tell me to dont post in many places he say i dint understand
(@zissilia , stop cross posting all over the board and hi-jack others threads. Consider this your first and only reminder.)
so i thought he dint help me any more
i am new to forum i dont know how use well and i dont know how to post foto so now i made new post

the last time it work with it was with linux first i t was with windows in one pc with win10x32 bit with this (pm3-bin-2.4.0) after i change the client and run it in another pc with linux lubundu with other firmware rdv40-64-20201119-but it was more easy to me with windows and graphical like (pm3-bin-2.4.0) i scanned many tags and was worked fine and i hade some question for the setting of anntenas and swich i post ted nobody answer to me about this
http://www.proxmark.org/forum/viewtopic.php?id=8269

and i tryed to change back and flash with: pm3-bin-756 (cdc+lua) but in flash it was not succeful it dint recognised after the pc in any com at all i tryed to flash with button i try many times all the lamp it was all on and dint flash and blinking when connect and dint recognise in windows and linux
so now i want to flash again
i prepfer to use with gaphical client and not with cmd , this pm3-bin-756 (cdc+lua) is working? i know is old version or if is newer client for this where can find ?
or i use from https://www.proxmarkbuilds.org
the
Latest official build &
Latest build for Proxmark3 RDV4 )
and when i will use again linux i must update the github ?

Last edited by zissilia (2021-02-04 23:53:43)

gator96100 · 2021-02-05 01:38:19

No you can not use pm3-bin-756 or pm3-bin-2.4.0. You will need "Latest build for Proxmark3 RDV4" from https://www.proxmarkbuilds.org/ or you can compile it yourself. NOTE: only x64 is supported on Windows.
If you want to update your cloned repo you can use git pull.
There is no GUI support.

zissilia · 2021-02-05 14:14:46

i have pm3-bin-756 (cdc+lua) what is diferemce with pm3-bin-756 ? so if i understand i will flash pm3-bin-756 ? the images is .elf can do with software jlink or with opencd i dont know programming to compile i am new in this stuf

gator96100 · 2021-02-05 15:11:35

Again pm3-bin-756 (cdc+lua) will not work!
Stop trying to force an old outdated firmware on your Proxmark3. THERE IS NO GUI, DEAL WITH IT!

zissilia · 2021-02-05 18:42:50

ok man dont kill me also i don't know like you i am beginner i don't have experience like you , don't be so strict with me & thank you for your time anyway ,
ok i fix it with segger it was more simple from flashing my android phone another 2 questions and finish
in linux i used some times before 3 months in other pc , now i must make update the github ?
i ask some help from experts opinion is wrong ?
the proxmark3-master of yours in https://github.com/RfidResearchGroup/proxmark3
is diferent from iceman code https://github.com/rfidresearchgroup/proxmark3#proxmark3-installation-and-overview
?
and i want to change lf antenna and install this is special folr implant chips what are the setings of micro swich button in LF=125 Q=14
or LF=125 Q=7
and needs tune ?
thanks for your time

C:\proxmark3\rdv4-20210205-5941ee6799b75d8996a6467a4ca0ea03ef06ed99>pm3
[=] Waiting for Proxmark3 to appear...
[=] Session log C:\proxmark3\rdv4-20210205-5941ee6799b75d8996a6467a4ca0ea03ef06ed99\client\/.proxmark3/logs/log_20210205.txt
[+] loaded from JSON file C:\proxmark3\rdv4-20210205-5941ee6799b75d8996a6467a4ca0ea03ef06ed99\client\/.proxmark3/preferences.json
[=] Using UART port COM15
[=] Communicating with PM3 over USB-CDC


  ██████╗ ███╗   ███╗█████╗
  ██╔══██╗████╗ ████║╚═══██╗
  ██████╔╝██╔████╔██║ ████╔╝
  ██╔═══╝ ██║╚██╔╝██║ ╚══██╗
  ██║     ██║ ╚═╝ ██║█████╔╝       Iceman
  ╚═╝     ╚═╝     ╚═╝╚════╝     bleeding edge

  https://github.com/rfidresearchgroup/proxmark3/


 [ Proxmark3 RFID instrument ]

 [ CLIENT ]
  client: RRG/Iceman/master/v4.9237-3012-g5941ee679 2021-02-05 12:39:02
  compiled with MinGW-w64 10.2.0 OS:Windows (64b) ARCH:x86_64

 [ PROXMARK3 ]
  firmware.................. PM3RDV4
  external flash............ present
  smartcard reader.......... present
  FPC USART for BT add-on... absent

 [ ARM ]
  bootrom: RRG/Iceman/master/v4.9237-3012-g5941ee679 2021-02-05 12:38:50
       os: RRG/Iceman/master/v4.9237-3012-g5941ee679 2021-02-05 12:38:58
  compiled with GCC 8.4.0

 [ FPGA ]
  LF image built for 2s30vq100 on 2020-07-08 at 23: 8: 7
  HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
  HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23: 8:30

 [ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 309545 bytes (59%) Free: 214743 bytes (41%)
  --= Second Nonvolatile Program Memory Size: None
  --= Internal SRAM Size: 64K bytes
  --= Architecture Identifier: AT91SAM7Sxx Series
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

Last edited by zissilia (2021-02-06 00:51:01)

Proxmark3 community

Announcement

#1 2021-02-04 20:31:31

hallo i want to flash rdv4.01 what is last client in linux & windows

#2 2021-02-04 21:54:00

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

#3 2021-02-04 22:12:36

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

#4 2021-02-04 23:48:39

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

#5 2021-02-05 01:38:19

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

#6 2021-02-05 14:14:46

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

#7 2021-02-05 15:11:35

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

#8 2021-02-05 18:42:50

Re: hallo i want to flash rdv4.01 what is last client in linux & windows

Board footer