Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2023-05-28 09:15:15
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Hello Proxmark community,
I recently purchased Proxmark3 v4.01 and tried to read my ID card, but unsuccessfully.
The only tag that is scanned was Indala (looks like false reading as there is always a different ID scanned.
The card looks like an extended CR100 ID card (11cm x 5.5cm).
What are the next steps? Can I try something else?
Thanks,
Offline
#2 2023-05-29 06:12:12
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
are you running latest source on your proxmark3?
Offline
#3 2023-05-29 15:10:02
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Yes, the latest source for RDV4 (rdv4-20230527-328e5461f8896f1a26295dc5fe573cbdc5e81549).
I did pm3-flash-fullimage then pm3-flash-bootrom, but then code failed on pm3-flash-all as it complains:
[!] Using pm3-flash-all on an oudated bootloader, use pm3-flash-bootrom first!
Press any key to continue . . .
Anyhow, I ignored this message and when I start pm3 and type "hw status" this message appears:
Smart card module (ISO 7816)
[#] version................. v3.10
[#] Outdated firmware. Please upgrade to v4.x or above.
Offline
#4 2023-05-29 20:30:19
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Follow the instructions on the repo on how to flash the sim module.
Offline
#5 2023-05-31 16:41:46
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Can you share the link, please?
Offline
#6 2023-06-02 06:53:28
- fazer
- Contributor
- Registered: 2019-03-02
- Posts: 156
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Hello, look in the doc of your pm3, there are all the instructions to update.
https://lab401.com/blogs/academy/proxmark-basics-updating-firmware-on-windows-linux
good day.
Last edited by fazer (2023-06-02 08:46:06)
Offline
#7 2023-06-02 19:51:30
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
I did follow this video before.
At 2:43 instruction says "Make sure that Smart Card module is at least 3.11", but my version is 3.10 and I don't know how to update it.
What is this Smart Card module? Does it affect reading capabilities?
Offline
#8 2023-06-04 07:25:31
- fazer
- Contributor
- Registered: 2019-03-02
- Posts: 156
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
For the first use it is necessary to follow this documentation. It is in pm3/doc/md/use_of_proxmark/configuration_and_verification.md
Hello, try smart -h
smart upgrade -h
smart upgrade -f sim013.bin
hw status
After you can follow the video for upgrade to smart 4.13
Have a good day.
Last edited by fazer (2023-06-04 07:36:26)
Offline
#9 2023-06-04 11:58:11
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Thanks, Fazer, that was very straightforward!
Offline
#10 2023-06-05 11:18:44
- fazer
- Contributor
- Registered: 2019-03-02
- Posts: 156
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Hello, I think we don't read enough of the ready-made documentation in the pm3, everything is very well explained there.
Good day.
Offline
#11 2023-06-10 10:03:35
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Agree, fazer. Do you have a link for the specific documentation you referred me to?
On the other hand, I am still unable to read my card. v4.01 does not recognize it most of the time and only sometimes I get (most probably) some false positives.
Is there a way to proceed from here?
Offline
#12 2023-06-10 10:11:31
- knyazs
- Contributor
- Registered: 2023-05-27
- Posts: 8
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
I got the following suggestion for possible card types based on the provided dimensions (11cm x 5.4cm) and considering long-range RFID cards:
* UHF (860-960 MHz)
* ISO 18000-6C Cards
* EPC Class 1 Gen 2 Cards
* Active RFID Cards (this is not the case, my one has no battery)
Do any of the above ring the bell? Any help in reading would be appreciated.
Offline
#13 2023-06-10 10:21:42
- fazer
- Contributor
- Registered: 2019-03-02
- Posts: 156
Re: ID Card 11cm x 5.5cm, Proxmark3 v4.01 can't detect tag
Hello Knyazs, look already in /pm3/doc/md there are quite a few things to start with, then there are two sliders slider on antenna LF 125 F 134 & 14 Q 7 try to change the values 14 Q 7 & frequency 125khz .
Launch the cmd auto also to have a bigger scan.
If you know the ref of your card, you need the doc of this card.
Good day.
Here is an invite https://discord.gg/QfPvGFRQxH
Last edited by fazer (2023-06-10 11:24:50)
Offline