Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
Hi all I used to build RFID readers for the pet world, 125,128 and memory escaping me 132 ? or is it 134 LOL
back to the coffee problem
=] hf search
[\] Searching for ISO14443-A tag...
[+] UID: 86 91 CC xx
[+] ATQA: 00 xx
[+] SAK: 09 [2]
[+] Possible types:
[+] MIFARE Mini 0.3K
[=] proprietary non iso14443-4 card found, RATS not supported
[=] hf search
[/] Searching for ISO14443-A tag...
[+] UID: A6 AA D5 xx
[+] ATQA: 00 xx
[+] SAK: 09 [2]
[+] Possible types:
[+] MIFARE Mini 0.3K
[=] proprietary non iso14443-4 card found, RATS not supported
two cards slightly corrupted with xx..
these are issued to get free coffee nothing is gained by cloning chips Mizip devices, but it would give me a little creditability. Thes keys fit inside a small rectangle hole, most chips / card would not fit ? is there a suitable rewitable chip that fits this small hole
Thanks
David
Offline
This is what happens when you don't read the rules. This is the introduction section.
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed