Proxmark3 community

bshh

Contributor

Registered: 2024-09-16

Posts: 4

ICLASS Card not found

Hi

I am trying to read a tag with the proxmark but I can not find the tag with "hf search".

On the phone using NFC Tools Pro on Android the tag shows:

ISO15693
NXP - ICODE SLIX
NfcV
NdefFormatable
112bytes
28 blocks

I am using the latest version:

[=] Session log /home/bs/.proxmark3/logs/log_20240916141554.txt
[+] loaded `/home/bs/.proxmark3/preferences.json`
[+] Using UART port /dev/ttyACM0
[+] Communicating with PM3 over USB-CDC


  8888888b.  888b     d888  .d8888b.   
  888   Y88b 8888b   d8888 d88P  Y88b  
  888    888 88888b.d88888      .d88P  
  888   d88P 888Y88888P888     8888"  
  8888888P"  888 Y888P 888      "Y8b.  
  888        888  Y8P  888 888    888  
  888        888   "   888 Y88b  d88P 
  888        888       888  "Y8888P"    [ ☕ ]



  [ Invest in open innovation! ]
     Patreon - https://www.patreon.com/iceman1001/
     Paypal  - https://www.paypal.me/iceman1001/


  [ Proxmark3 RFID instrument ]

    MCU....... AT91SAM7S512 Rev B
    Memory.... 512 KB ( 64% used )

    Client.... Iceman/master/v4.18994-65-g805dc99b9 2024-09-16 14:35:46
    Bootrom... Iceman/master/v4.18994-65-g805dc99b9-suspect 2024-09-16 14:54:47 
    OS........ Iceman/master/v4.18994-65-g805dc99b9-suspect 2024-09-16 14:54:56 
    Target.... PM3 GENERIC

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: ICLASS Card not found

iCODE is not the same as iCLASS

what is the output of

hf search

bshh

Contributor

Registered: 2024-09-16

Posts: 4

Re: ICLASS Card not found

Thank you.

I played around with the position of the tag and taped it in one spot that gave me best results during sniff.

hf search gives me no tags found

[usb] pm3 --> hf search
[!] ⚠️  No known/supported 13.56 MHz tags found

hf 15 info also no tags
[usb] pm3 --> hf 15 info
[=] Using scan mode
[!] ⚠️  no tag found

Sniffing works:

[usb] pm3 --> hf 15 sniff
[=] You can cancel this operation by pressing the pm3 button
[#]
[#] Trace length........... 719
[?] Try `hf 15 list` to view captured tracelog
[?] Try `trace save -h` to save tracelog for later analysing
[=] Done!
[usb] pm3 --> hf 15 list
[+] Recorded activity ( 719 bytes )
[=] start = start of start frame. end = end of frame. src = source of transfer.
[=] ISO15693 / iCLASS - all times are in carrier periods (1/13.56MHz)

      Start |        End | Src | Data (! denotes parity error)                                           | CRC | Annotation
------------+------------+-----+-------------------------------------------------------------------------+-----+--------------------
          0 |      22016 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY
     116896 |     130720 | Rdr |1F  00  45                                                               |  !! | ?
     229056 |     251072 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY
     356384 |     378400 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY
     382816 |     436064 | Tag |00  01  A2  EA  33  03  53  01  04  E0  3F  6F                           |  ok |
     508160 |     530176 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY
     614432 |     636448 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY
     640864 |     694112 | Tag |00  01  A2  EA  33  03  53  01  04  E0  3F  6F                           |  ok |
     765280 |     787296 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY
     884192 |     906208 | Rdr |26  01  00  F6  0A                                                       |  ok | INVENTORY

When I try to send the same data I am getting a command failed:

[usb] pm3 --> hf 15 raw -d 260100f60a
[!] ⚠️  command failed