Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2012-01-23 09:16:35
- aminbakhtvar62
- Contributor
- Registered: 2011-02-23
- Posts: 24
bootrom.s19
i run bootrom.s19 based on the new released taturial paper but i get the 'cant run the command' reply for almost 400 times in each line of the code.any help would be appreciated.
ps does everyone has jtag connection mounted on the proxmark board ?because mine doesnt have any.
Offline
#2 2012-01-23 10:37:32
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: bootrom.s19
Hi aminbakhtvar62,
What tutorial paper are you reading? Have you read any of the guides here - link?
If you have not already done so, read the appropriate getting started guide followed by 'Compiling Proxmark source and firmware upgrading'.
I'm not sure where you got your PM3 from but as far as I'm aware http://proxmark3.com/ sell theirs with everything loaded.
If you're missing the JTAG header then you will need to load it yourself. Look out for R7 (10K), it might be missing also.
Regards,
-0xFFFF
Offline
#3 2012-01-25 09:12:09
- aminbakhtvar62
- Contributor
- Registered: 2011-02-23
- Posts: 24
Re: bootrom.s19
hello 0xFFFF
thanks for your reply.
i bought the board from hackable devices.org. John Lejeune,Cécile and Clarisse from the company helped me out in different stages to receive the board.
i read the pdf files "Proxmark III - Windows XP SP3 GSG v1.pdf" & "Compiling Proxmark source and firmware upgrading v1.pdf" which were posted last week.
about the R7 , I looked at the "proxmark3.1b.pdf" in front of the antenna connection there is 4 places of possibly resistors. on my board two of them on each side are empty . i couldnt locate the exact place of R7 because i dont have the clear PCB.
thx
Offline
#4 2012-01-25 12:44:59
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: bootrom.s19
Hi aminbakhtvar62,
Would you mind posting a photo of your Proxmark? I'm interested in seeing what is loaded, quality of manufacture, etc...?
I'm not sure how old the PDF is that you are referring to. I'd suggest checking out the project and having a look at "proxmark3_schema.pdf". Alternatively, you can download the PDF directly by going here, right-clicking View raw file and Save Link As...
I believe the four locations you are referring to are the test points which have not been loaded on your board. R7 runs parallel with SV3 (the TJAG header).
Regards,
-0xFFFF
Offline
#5 2012-01-26 14:44:51
- aminbakhtvar62
- Contributor
- Registered: 2011-02-23
- Posts: 24
Re: bootrom.s19
Hi 0xFFFF
thank you for your reply
I took the pictures.but i couldnt find a way to post them .Please send me your email or perhaps you can advise me how to upload an image in the post.and i checked the document. R7 is loaded on my board, i mounted JTAG header today and a friend of mine has segger JLINK. tomorrow i'm gonna test flashing bootrom with his device.
Best Regards
Last edited by aminbakhtvar62 (2012-01-26 14:51:09)
Offline
#6 2012-01-29 04:22:05
- o0o0o0o
- Contributor
- From: Germany
- Registered: 2011-10-06
- Posts: 64
Re: bootrom.s19
Hi aminbakhtvar62,
Use any image hosting website
Then post the url here.
Offline
#7 2012-01-29 05:43:01
- aminbakhtvar62
- Contributor
- Registered: 2011-02-23
- Posts: 24
Re: bootrom.s19
hi
thanks o0o0o0o
Last edited by aminbakhtvar62 (2012-01-29 05:44:33)
Offline
#8 2012-01-29 13:09:12
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: bootrom.s19
Thanks for taking the time to post this aminbakhtvar62.
Regards,
-0xFFFF
Offline
Pages: 1