Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I am new here please let me know if I am in the wrong thread.
But I am having trouble using hf 14a list after hf 14a snoop. Can anyone tell me how to solve this thanks!
Offline
Help us help you socio101. You will need to provide more information.
Offline
Okay I am able to put it in snoop mode but it stays on forever and I don't know if it is supposed to stop after a while or keep going so I press the button and it goes back to the mode attached to the computer. when I type hf 14a list instead of listing the traces of the rfid tags it just sits there blinking is it waiting for something or is something wrong I am not sure but thats whats happening.
Offline
You've left me with little information socio101.
What build are you using?
Have you updated the PM3?
Snoop will eventually exit out when buffer is full. If you keep snooping transactions, the PM3 will usually exit out pretty quickly.
I'm assuming you're talking about MIFARE Classic?
RFID is a term normally used for low frequency tags with unidirectional communication to the PCD.
NFC is a term normally used for high frequency tags with bidirectional communications with the PCD. <- MIFARE
Offline
Try pressing the button on the device while it is in the "snoop" mode. That should make it exit. After that, You should be able to see what it captured with "hf 14a list".
Offline
Pages: 1