Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2013-03-09 20:42:04

MnBadger
Contributor
Registered: 2013-03-09
Posts: 19

Command set for Mifare Ultralight (Non C)

Is there a command set for reading/writing Mifare Ultralight (Non C)? I've read through the NXP documentation and it appears you don't need a key but I'm still unclear as to how to access it.

Offline

#2 2013-04-09 01:13:17

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 632

Re: Command set for Mifare Ultralight (Non C)

Look at AN10834 and AN1303.
You probably want to look for 'AN10856 Mifare classic commands'. It can be hard to find but there is plenty of documentation available on the various Mifare commands.

Offline

#3 2013-04-13 01:13:31

MnBadger
Contributor
Registered: 2013-03-09
Posts: 19

Re: Command set for Mifare Ultralight (Non C)

Much appreciated!

Offline

Board footer

Powered by FluxBB