Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2011-06-23 06:44:29

laser
Contributor
Registered: 2011-06-23
Posts: 24

proxmark3 for sales

We have made same proxmark3 board in China. And it is cheap for students and persional(for company we have a higher price).
We will give manual for beginners. The firmware we download is R480.

contact:

phone: 13113330725

mail: laser21@163.com

MSN: xfpga@hotmail.com

http://item.taobao.com/item.htm?id=10270073341

我们这个电路板和官方的完全一样。

Last edited by laser (2011-08-20 15:58:38)

Offline

#2 2011-06-23 12:29:03

spookyman166
Member
Registered: 2011-06-20
Posts: 15

Re: proxmark3 for sales

How much would shipping one of these cost to NZ via Hong Kong Post Registered mail?

Offline

#3 2011-06-23 12:34:15

proxcat
Contributor
Registered: 2008-11-28
Posts: 62
Website

Re: proxmark3 for sales

You could at least say "Thanks!" for the images pinched from proxmark3.com. It's the polite thing to do.

Offline

#4 2011-06-24 02:15:59

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

We use the Gerbers from (http://cq.cx/proxmark3.pl) to produce the board, the picture was taken from our own board.

The cost:(yuan)
board:980
Delivery costs:210 (China EMS)
(http://www.ems.com.cn/internetPostageAc … otoPostage)

total:1190yuan = $184

Offline

#5 2011-06-29 21:02:16

vivat
Contributor
Registered: 2010-10-26
Posts: 332

Re: proxmark3 for sales

OP-scammer or not?

Offline

#6 2011-07-02 13:48:30

spookyman166
Member
Registered: 2011-06-20
Posts: 15

Re: proxmark3 for sales

no idea...

Offline

#7 2011-07-04 00:53:28

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

The board I saled is the same as the author released.

Here is some picture, the tune voltage is about 12v.

http://hi.baidu.com/xfpga/album/Proxmark

Many RFID company in China bought this board for snoop the communication between reader and card.

Offline

#8 2011-07-04 15:26:22

vivat
Contributor
Registered: 2010-10-26
Posts: 332

Re: proxmark3 for sales

laser
Can you take some hi-res macro photos of the board?Your pictures are shitty

Offline

#9 2011-07-06 08:51:41

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

Hi vivat

I use a mobile phone to take the photo(2Mega pixel). The board is working well, all of them have more than 11v.

I make a 13.56MHz pcb antenna a few days ago, and it will return soon. The design file was taken from this forum, the board is very small, only 3mmx5mm, I will report the result later.

Offline

#10 2011-07-14 07:25:27

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

The PCB antenna can be seen in

http://hi.baidu.com/xfpga/blog/item/54d … e6ff2.html

The hf tune voltage is about 8.6v, and can use it to reader a mifare card.

But it can not snoop the communication between a reader and a card.  Why?

I can use it this board to snoop using the antenna design by reol.

Offline

#11 2011-07-14 07:26:33

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

The antenna design file was taken from this forum, in the download area.

FluxBB bbcode 9fa2f50c-5050-426b-801b-31498b12abe1

Last edited by laser (2011-07-14 07:55:23)

Offline

#12 2011-08-05 16:29:38

cormas
Member
Registered: 2011-07-25
Posts: 5

Re: proxmark3 for sales

I bought the PROXMARK3 from laser and eveithing was OK.
I received the board at my home in only 2 days !

Offline

#13 2011-08-11 13:30:50

nusch
Member
Registered: 2011-07-25
Posts: 4

Re: proxmark3 for sales

where are you from and how can you prove it ?

Offline

#14 2011-08-23 23:24:28

spinoinside
Member
From: Italy
Registered: 2010-02-06
Posts: 14

Re: proxmark3 for sales

I have also purchased a proxmark3 from laser (ebay) ... very fast shipping !!!
regards Spinoinside (Italy)

Proxmark3

Offline

#15 2011-10-21 14:11:45

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

Hi, all

We have made LF antenna using the pcb provided by author J.Westhues, we only alter the adaptor(USB adaptor). and thanks jose from spain, he help me alter the adapt connector.
13 dollars pcs.(including LF antenna and a adaptor,usb to mini 4pin)


8b1d9686-a062-434c-a4e9-88ddc4655494.jpg
ffbe2af4-9f07-4aaf-bd92-0cac7c1fa5ce.jpg
6c443a1c-46d5-4997-902c-6e530400c146.jpg
1bf35c47-428d-4bd3-a1dd-8ddeb470d72e.jpg
2728250d-4f24-4317-abdb-c6e16b35cec8.jpg
914433dc-9a61-4354-a00c-68d5e7e60a71.jpg
1b1915f0-8188-403e-90a2-020573a77c05.jpg
a7d36a8b-6f37-440b-9d96-46571e42e000.jpg
2bc9acea-700f-4399-89aa-b504d82c657e.jpg
309976ab-a54f-407f-a07a-712eb9e1510c.jpg
654e053a-c5c2-4349-9f92-0879db63678c.jpg
40a4cc83-008a-48a0-b556-4b40db4dd290.jpg

Offline

#16 2011-10-23 17:56:50

jonor
Contributor
Registered: 2009-09-17
Posts: 97

Re: proxmark3 for sales

Which is the price for antenna 13.56MHz? Have you still problems with snoop? Which is the voltage of antenna before and after a RFID Mifare? Could you permit to see also the test with other tags?

Thank you

Offline

#17 2011-10-24 05:52:56

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

This is for LF antenna.
we have solved the snoop problem.
this voltage is after card.

thank you.

Offline

#18 2011-10-24 22:37:59

jonor
Contributor
Registered: 2009-09-17
Posts: 97

Re: proxmark3 for sales

Sorry in this thread speach about proxmark3 for sales, and post image for PCB 13.56Mhz. Also in the image with LF antenna there are image of antenna 13.56MHz.
I asked for price and not give a reply.

Offline

#19 2012-01-09 10:25:32

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

here is our new webpage:
http://www.xfpga.com/P_view.asp?pid=374
we also provide OEM service and PCB manufactory.
http://www.xfpga.com
any questions, please email to us at: laser21@163.com or gezhitech@163.com

Offline

#20 2012-08-13 14:45:26

elektryk
Contributor
Registered: 2009-09-10
Posts: 43

Re: proxmark3 for sales

Anyone tried to by at this seller (in china)? I wonder if were there any problems at customs when entering to UE.
If so, how expensive were custom fines or VAT?

Last edited by elektryk (2012-08-13 14:46:35)

Offline

#21 2012-08-13 17:14:28

edo1
Contributor
Registered: 2012-05-02
Posts: 18

Re: proxmark3 for sales

elektryk wrote:

Anyone tried to by at this seller (in china)?

yes, I bought one PM3. I'm totally satisfied with it.

Offline

#22 2012-08-16 21:43:46

elektryk
Contributor
Registered: 2009-09-10
Posts: 43

Re: proxmark3 for sales

edo1 wrote:

yes, I bought one PM3. I'm totally satisfied with it.

Can you describe little more precisly? Do you live in europe? My question was about custom problems.

Offline

#23 2012-08-20 19:16:44

edo1
Contributor
Registered: 2012-05-02
Posts: 18

Re: proxmark3 for sales

no, I'm from Russia.
but there is some messages from EU citizens

Offline

#24 2012-08-26 20:24:23

egaX
Member
Registered: 2012-08-26
Posts: 2

Re: proxmark3 for sales

Hi all,

Just received the proxmark board + antennas + test cards + usb & hirose cable from this seller, via http://www.xfpga.com/.
Everything works well.

------------------------------------------------------------------------------
// Just connected LF antenna and tried to identify an em4x card :
------------------------------------------------------------------------------
$ ./client/proxmark3.exe

Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 500-suspect 2011-11-10 14:34:13
#db# os: svn 500-suspect 2011-11-10 14:34:41
#db# FPGA image built on 2009/12/ 8 at  8: 3:54
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.


# LF antenna: 13.29 V @   125.00 kHz
# LF antenna: 10.47 V @   134.00 kHz
# LF optimal: 13.70 V @   126.32 kHz
# HF antenna:  0.13 V @    13.56 MHz
# Your HF antenna is unusable.
proxmark3> lf em4x em410xwatch
#db# buffer samples: 00 00 00 00 00 00 00 c5 ...
Reading 2000 samples

Done!

Auto-detected clock rate: 64
Thought we had a valid tag but failed at word 3 (i=29)
Thought we had a valid tag but failed at word 3 (i=93)
EM410x Tag ID: 0500XXXXXX
proxmark3>

------------------------------------------------------------------------------
// And here I connected HF antenna and tried to identify a Mifare card:
------------------------------------------------------------------------------
$ ./client/proxmark3.exe

Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.


# LF antenna:  0.00 V @   125.00 kHz
# LF antenna:  0.00 V @   134.00 kHz
# LF optimal:  0.00 V @ 12000.00 kHz
# HF antenna:  9.05 V @    13.56 MHz
# Your LF antenna is unusable.
proxmark3> hf 14a reader
ATQA : 04 00
 UID : XX XX XX XX 00 00 00 00 XX XX XX XX
 SAK : 08 [2]
 SAK : NXP MIFARE CLASSIC 1k | Plus 2k
proprietary non-iso14443a card found, RATS not supported
proxmark3> hf mf rdsc 0 A FFFFFFFFFFFF                
--sector no:00 key type:00 key:ff ff ff ff ff ff      
#db# READ SECTOR FINISHED                             
                                                      
isOk:01                                               
data:XX XX XX XX XX XX XX XX 62 63 64 65 66 67 68 69  
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  
                                                      
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  
data:00 00 00 00 00 00 XX XX XX XX ff ff ff ff ff ff  
------------------------------------------------------------------------------

Photo of all items together:

lBJmzl.jpg
full image: http://imgur.com/lBJmz

Photo of the board:
Soldering quality is OK. (A little flux left near IC5, but still OK)
21uW9l.jpg
full image: http://imgur.com/21uW9

Offline

#25 2012-08-27 17:32:13

elektryk
Contributor
Registered: 2009-09-10
Posts: 43

Re: proxmark3 for sales

egaX: where are you from, and how much did you pay including custom fee?

Offline

#26 2012-08-29 21:31:03

egaX
Member
Registered: 2012-08-26
Posts: 2

Re: proxmark3 for sales

Russia, $242 = $214 + shipping for $28.

Offline

#27 2012-09-23 22:36:38

gbhuk
Contributor
Registered: 2012-09-20
Posts: 33

Re: proxmark3 for sales

Hi,

I'm looking to work with 125kHz cards predominantly but took the plunge and bought a Proxmark3, both LF and HF antennae, usb & hirose cables and some blank T55x7 cards from this seller via http://www.xfpga.com.

DHL delivery took only a few days to Mexico - seller kept in email contact throughout.  Customs checked the contents but didn't levy any fees or duty.

Everything's working well.  Here's a picture of the LF antenna and the Proxmark3 (sitting atop one of the blank cards to show the scale):
Proxmark3, LF Antenna and T5557 card

A full resolution version of the above image is here (to give anyone interested an idea of the quality of the construction): http://i.imgbox.com/abllTxgd.jpg

Now to get to grips with the source code...

Offline

#28 2013-05-02 10:28:42

gaucho
Contributor
From: France
Registered: 2010-06-15
Posts: 444
Website

Re: proxmark3 for sales

Dear Laser, i followed the link posted on your first post of this thread with the price.
Could you please contact me with a quotation (in euro currency) for the following:
-Quantity 1 proxmark3
-Quantity 1 HF antenna
-Quantity 1 LF antenna
-cables
-shipping cost to Italy (italian postal code 00100)

Thank you.
Regards.


Gaucho

Last edited by gaucho (2013-05-02 15:28:16)

Offline

#29 2013-06-01 22:34:15

dogfriend
Contributor
From: -= Germany =-
Registered: 2013-06-01
Posts: 17
Website

Re: proxmark3 for sales

hi laser,

i am new here at the forum and i like to buy a complete set of the pm3.
proxmark3; hf antenna; lf antenna; usb cables; tags and shipping costs. stuff need to be sent to germany. i like to know if i can pay via paypal.

would you please contact me asap?
thanks a lot in advance.



best regards
oliver

Offline

#30 2013-07-08 01:27:53

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: proxmark3 for sales

Hi

thank you for you interest in our product.
here is our website:
http://www.xfpga.com

you can also contact me at xfpga@hotmail.com

Offline

#31 2013-10-24 15:14:04

smartens
Member
From: Belgium
Registered: 2013-10-24
Posts: 5

Re: proxmark3 for sales

Hi all
Last week I bought the proxmark board + antennas + blank cards + usb & hirose cable from this seller Laser, via http://www.xfpga.com/.
Contact and delivery was very fast. Everything worked well. I just had to clone 1 Indala card and now I'm selling it again.
Who is interested?

proxmark

Offline

#32 2013-10-24 18:56:56

gaucho
Contributor
From: France
Registered: 2010-06-15
Posts: 444
Website

Re: proxmark3 for sales

which is the price, shipping excluded? (supposed that the shipping cost is less than 10€)

Offline

#33 2013-10-25 08:46:56

smartens
Member
From: Belgium
Registered: 2013-10-24
Posts: 5

Re: proxmark3 for sales

Hi gaucho

I paid $203 for all the equipment, excl. shipping and customs cost.
Willing to sell it for €120 excl shipping cost. OK for you?

gaucho wrote:

which is the price, shipping excluded? (supposed that the shipping cost is less than 10€)

Offline

#34 2013-10-25 09:46:30

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: proxmark3 for sales

Hi smartens, you said "antennas" but in the picture there is only 1 antenna (LF)... is this correct ? No HF antenna ?

Offline

#35 2013-10-25 10:40:12

smartens
Member
From: Belgium
Registered: 2013-10-24
Posts: 5

Re: proxmark3 for sales

Hi Asper
Yes correct, 1 antenna (not -s). Everything I have/sell is in that picture.

asper wrote:

Hi smartens, you said "antennas" but in the picture there is only 1 antenna (LF)... is this correct ? No HF antenna ?

Offline

#36 2013-10-27 20:28:48

smartens
Member
From: Belgium
Registered: 2013-10-24
Posts: 5

Re: proxmark3 for sales

Hi nfcjoe

Kein problem :-)
I'll send it to Austria. Please contact me by email: stijnmartens AT gmail DOT com

nfcjoe wrote:

I'd buy it if you send it to Austria

Offline

#37 2013-11-19 10:35:04

smartens
Member
From: Belgium
Registered: 2013-10-24
Posts: 5

Re: proxmark3 for sales

Hi all

I didn't hear from nfcjoe anymore.
Anybody interested in buying my package for €120 excl shipping? (picture in previous post)

Stijn

Offline

#38 2013-11-30 21:08:16

n3rd
Contributor
Registered: 2013-03-30
Posts: 38

Re: proxmark3 for sales

Hello LASER
I purchased the PM3 from you ( gezhitech@163.com ) in March of this year.

Does it come pre-flashed?  I am having problems getting started, but I don't know if the board comes with firmware or not.

Thanks

Offline

#39 2014-01-13 15:04:18

skappy
Contributor
Registered: 2014-01-13
Posts: 91

Re: proxmark3 for sales

Dear Smartens,
Do you still sold your device please ?
Thank you very much
Have a nice day

Offline

#40 2014-01-13 18:12:04

gaucho
Contributor
From: France
Registered: 2010-06-15
Posts: 444
Website

Re: proxmark3 for sales

skappy, also consider this alternative: http://www.proxmark.org/forum/viewtopic.php?id=1599&p=5

Offline

#41 2014-01-14 08:52:15

skappy
Contributor
Registered: 2014-01-13
Posts: 91

Re: proxmark3 for sales

Hi Gaucho,
Thank you for your help ...
Do you still have the possibility to sell proxmark 3 device as mentionned in the post ? I've miss the opportunity but i'm very interested in buying such a a device.
I'm also interesred in cards and hirose connectors.
Thank you very much for your help
Have a nice day

Offline

#42 2014-01-14 18:05:15

gaucho
Contributor
From: France
Registered: 2010-06-15
Posts: 444
Website

Re: proxmark3 for sales

write me by email. find it on my profile.

Offline

Board footer

Powered by FluxBB