Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-07-31 08:46:55

crystal0716
Member
Registered: 2014-07-31
Posts: 3

I want to but R40/RW300/RW400

Anyone selling R40/RW300 or RW400 ?
I need the oldest model / Rev A like  6121AKN0000.

and i also can help if who want to buy the cheapest RFID/ pickit in the China market smile

Offline

#2 2014-07-31 08:48:30

crystal0716
Member
Registered: 2014-07-31
Posts: 3

Re: I want to but R40/RW300/RW400

crystal0716 wrote:

Anyone selling R40/RW300 or RW400 ?
I need the oldest model / Rev A like  6121AKN0000. which can clone the iclass card.

and i also can help if who want to buy the cheapest RFID/ pickit in the China market smile

Offline

#3 2014-08-01 00:41:15

carl55
Contributor
From: Colorado USA
Registered: 2010-07-04
Posts: 128

Re: I want to but R40/RW300/RW400

There are a couple of RW300 RevA readers currently listed on eBay.
Here is the link. The auction is valid for another 5 days.
http://www.ebay.com/itm/LOT-NEW-HID-ICl … 43cd2a1634

Offline

#4 2014-09-04 13:22:19

proxpunk
Member
Registered: 2010-01-30
Posts: 4

Re: I want to but R40/RW300/RW400

Also looking for rev A RW300/RW400.
Anyone have one for sale?

Offline

#5 2015-04-17 06:00:34

perimbean
Member
Registered: 2015-04-13
Posts: 6

Re: I want to but R40/RW300/RW400

Argh...too late to the party....and now it's extinct... sad

Offline

#6 2015-04-17 18:33:25

carl55
Contributor
From: Colorado USA
Registered: 2010-07-04
Posts: 128

Re: I want to but R40/RW300/RW400

The older RevA RW300/RW400 iclass readers are definitely harder to find but they are certainly not extinct.
In fact, depending on what your intended use is you may be able to use one of the many other RevA readers.

Here are some interesting facts about iclass readers that HID will not tell you about.
1. Basically all RevA iclass readers use the same identical firmware (e.g. RW300,RW400,RWK400,R30,R40,RK40).
This has been verified by dumping the firmware of each of these readers.

2. The non-write models (R30,R40,RK40) can be made to be fully functional Read/Write units. The non-write models use the same circuit board as their read/write counterparts. The only difference is that the RS-232 transceiver part is not populated on the PCB and the serial I/O interface wires are not brought out.

I personally have converted an RK40 unit into a fully functional RWK400 unit simply by cutting out a small portion of potting material on the back of the reader and installing a wire connection on the serial UART's Tx and Rx signals. Attaching these signals to a cheap TTL-to-USB converter provides the serial interface to the PC that the missing RS-232 transceiver chip normally provides. I am in the process of demonstrating the same capability for an R40 reader but I have not yet completed that activity.

I do have a few spare RevA iclass readers (most models) if anyone is looking for one to support any of their own testing. However, you must provide a US shipping address since I will not ship internationally.

Offline

Board footer

Powered by FluxBB