Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-12-03 05:28:02
- anarchywon
- Contributor
- Registered: 2017-12-03
- Posts: 2
Hello y'all
Hello y'all
I have been lurking for about 3 months now so I thought it was time to make a account, (when I signed up it said I needed to do a intro post so here it is)
my background is physical security with a interest in RFID and electronics.
I am hope to learn alot here.
I was following the wiki and bricked my Proxmark3 (its a cheaper "easy" model) so I dugout my bus-pirate and am in the process of fixing it (see I am already learning something new).
once I have my Proxmark3 up and running I am sure I will have lots of questions.
Offline
#2 2017-12-03 07:55:16
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hello y'all
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
#3 2017-12-03 20:20:51
- anarchywon
- Contributor
- Registered: 2017-12-03
- Posts: 2
Re: Hello y'all
thanks for the welcome iceman, I am still reading all the links from that post 
by chance is there anything like a "RFID/Proxmark3 for dummies" book I should be reading so I can get a better understanding of the subject?
Offline
#4 2017-12-03 20:57:15
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hello y'all
nop. the wiki is a good start.
Offline
Pages: 1
Topic closed