Proxmark3 community

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

SOLVED **viking or indala ?

hello
A tag that was recognised as viking is now founded as Indala.

Iam trying to clone it into a T55x7, but I can,t get the UID of the Tag.

I have 2 questions :

1/ why a tag that was recognised as a wiking is now recognised as Indala. (all of them, even a viking copy is now founded as Indala) ?
2/ any chance to clone a indala without the UID ?

tks

Last edited by Pm3user (2018-08-16 02:25:16)

marshmellow

Contributor

From: US

Registered: 2013-06-10

Posts: 2,302

Re: SOLVED **viking or indala ?

hw version? And trace of tag?

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

Re: SOLVED **viking or indala ?

 [ CLIENT ]
 client: iceman build for RDV40 with flashmem; smartcard;

bootrom: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:55
os: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:59
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59


 [ Hardware ]
  --= uC: AT91SAM7S256 Rev C
  --= Embedded Processor: ARM7TDMI
  --= Nonvolatile Program Memory Size: 256K bytes, Used: 199763 bytes (76%) Free: 62381 bytes (24%)
  --= Second Nonvolatile Program Memory Size: None
  --= Internal SRAM Size: 64K bytes
  --= Architecture Identifier: AT91SAM7Sxx Series
  --= Nonvolatile Program Memory Type: Embedded Flash Memory 

by trace of tag you mean this ?

 lf read
#db# LF Sampling config:
#db#   [q] divisor:           95
#db#   [b] bps:               8
#db#   [d] decimation:        1
#db#   [a] averaging:         1
#db#   [t] trigger threshold: 0
#db# Done, saved 40000 out of 40000 seen samples at 8 bits/sample
#db# buffer samples: 00 00 00 00 00 00 00 00 ...
Reading 39999 bytes from device memory

Data fetched
Samples @ 8 bits/smpl, decimation 1:1 

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

Re: SOLVED **viking or indala ?

NB iam using a PM3 EASY ELECHOUSE

marshmellow

Contributor

From: US

Registered: 2013-06-10

Posts: 2,302

Re: SOLVED **viking or indala ?

After lf read, do a data save xxxx.pm3. And post the file to a file share then post a link to it.

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

Re: SOLVED **viking or indala ?

I don't understand what's going on now the viking tag has been reognised

lf search
NOTE: some demods output possible binary
  if it finds something that looks like a tag
False Positives ARE possible


Checking for known tags:

Viking Tag Found: Card ID 0780987F, Checksum: 3A
Raw: F200000780987F3A

Valid Viking ID Found!

Valid T55xx Chip Found
Try lf t55xx ... commands 

marshmellow

Contributor

From: US

Registered: 2013-06-10

Posts: 2,302

Re: SOLVED **viking or indala ?

part of your issues are

[ CLIENT ]
client: iceman build for RDV40 with flashmem; smartcard;

bootrom: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:55
os: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:59

you're using Iceman's Client with the master's firmware..  never mix different client software and firmware

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

Re: SOLVED **viking or indala ?

What would be the right client to use with the master firmware ?

marshmellow

Contributor

From: US

Registered: 2013-06-10

Posts: 2,302

Re: SOLVED **viking or indala ?

The one that compiles with the master firmware.

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

Re: SOLVED **viking or indala ?

I found this topic on compiled windows clients, but there is no trace about master's firmware

http://proxmark.org/forum/viewtopic.php?id=1562

Iam on the right way ? Could you please oriantate my search ? tks

gator96100

Contributor

From: Austria

Registered: 2016-03-25

Posts: 177

Re: SOLVED **viking or indala ?

The link you provide is outdated here are the up to date versions: Compiled Windows clients - always up to date
You are using different client and firmware versions, meaning you did not flash your Proxmark. See the How to use section in the link I provided.
Your Proxmark is using the master firmware(official), whereas your client is from the iceman repository.

Pm3user

Contributor

Registered: 2018-05-16

Posts: 17

Re: SOLVED **viking or indala ?

thanks, I remember I did flash my proxmark but maybe with the official firmware....
I will make sure to run same client and firmware version when using the pm3

tks  again for all the precious advices and the knowledge shared.