Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-08-04 23:44:27

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

SOLVED **viking or indala ?

hello
A tag that was recognised as viking is now founded as Indala.

Iam trying to clone it into a T55x7, but I can,t get the UID of the Tag.

I have 2 questions :

1/ why a tag that was recognised as a wiking is now recognised as Indala. (all of them, even a viking copy is now founded as Indala) ?
2/ any chance to clone a indala without the UID ?

tks

Last edited by Pm3user (2018-08-16 02:25:16)

Offline

#2 2018-08-04 23:50:03

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: SOLVED **viking or indala ?

hw version? And trace of tag?

Offline

#3 2018-08-05 00:13:37

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Re: SOLVED **viking or indala ?

 [ CLIENT ]
 client: iceman build for RDV40 with flashmem; smartcard;

bootrom: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:55
os: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:59
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59


 [ Hardware ]
  --= uC: AT91SAM7S256 Rev C
  --= Embedded Processor: ARM7TDMI
  --= Nonvolatile Program Memory Size: 256K bytes, Used: 199763 bytes (76%) Free: 62381 bytes (24%)
  --= Second Nonvolatile Program Memory Size: None
  --= Internal SRAM Size: 64K bytes
  --= Architecture Identifier: AT91SAM7Sxx Series
  --= Nonvolatile Program Memory Type: Embedded Flash Memory 

by trace of tag you mean this ?

 lf read
#db# LF Sampling config:
#db#   [q] divisor:           95
#db#   [b] bps:               8
#db#   [d] decimation:        1
#db#   [a] averaging:         1
#db#   [t] trigger threshold: 0
#db# Done, saved 40000 out of 40000 seen samples at 8 bits/sample
#db# buffer samples: 00 00 00 00 00 00 00 00 ...
Reading 39999 bytes from device memory

Data fetched
Samples @ 8 bits/smpl, decimation 1:1 

Offline

#4 2018-08-05 00:35:36

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Re: SOLVED **viking or indala ?

NB iam using a PM3 EASY ELECHOUSE

Offline

#5 2018-08-05 00:57:07

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: SOLVED **viking or indala ?

After lf read, do a data save xxxx.pm3. And post the file to a file share then post a link to it.

Offline

#6 2018-08-05 01:21:10

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Re: SOLVED **viking or indala ?

I don't understand what's going on now the viking tag has been reognised

lf search
NOTE: some demods output possible binary
  if it finds something that looks like a tag
False Positives ARE possible


Checking for known tags:

Viking Tag Found: Card ID 0780987F, Checksum: 3A
Raw: F200000780987F3A

Valid Viking ID Found!

Valid T55xx Chip Found
Try lf t55xx ... commands 

Offline

#7 2018-08-05 04:13:12

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: SOLVED **viking or indala ?

part of your issues are

[ CLIENT ]
client: iceman build for RDV40 with flashmem; smartcard;

bootrom: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:55
os: master/v3.0.1-371-ge8924be-suspect 2018-05-15 12:20:59

you're using Iceman's Client with the master's firmware..  never mix different client software and firmware

Offline

#8 2018-08-05 09:50:01

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Re: SOLVED **viking or indala ?

What would be the right client to use with the master firmware ?

Offline

#9 2018-08-05 12:07:29

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: SOLVED **viking or indala ?

The one that compiles with the master firmware.

Offline

#10 2018-08-05 12:20:56

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Re: SOLVED **viking or indala ?

I found this topic on compiled windows clients, but there is no trace about master's firmware

http://proxmark.org/forum/viewtopic.php?id=1562

Iam on the right way ? Could you please oriantate my search ? tks

Offline

#11 2018-08-05 13:43:25

gator96100
Contributor
From: Austria
Registered: 2016-03-25
Posts: 177

Re: SOLVED **viking or indala ?

The link you provide is outdated here are the up to date versions: Compiled Windows clients - always up to date
You are using different client and firmware versions, meaning you did not flash your Proxmark. See the How to use section in the link I provided.
Your Proxmark is using the master firmware(official), whereas your client is from the iceman repository.

Offline

#12 2018-08-16 02:24:30

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Re: SOLVED **viking or indala ?

thanks, I remember I did flash my proxmark but maybe with the official firmware....
I will make sure to run same client and firmware version when using the pm3

tks  again for all the precious advices and the knowledge shared.

Offline

Board footer

Powered by FluxBB