Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
So I was able to get the client (proxmark/client/proxmark3) running on osx mavericks over the weekend but there's some problems. If I point it to an invalid serial port I can type in commands without issue but it then fails saying something like 'unable to send command to device', if I point it to the actual usb serial port (something like /dev/tty000) then it sorta freezes up and I'm unable to type, I can slam the enter key and sometimes the help info appears but it seems to ignore the line breaks. I'm assuming there is something failing silently, is there any logs I should be looking for or perhaps a verbose/debug mode?
Any help is appreciated!
Offline
Here's what I mean by ignoring line breaks when I rapidly hit the enter key.
http://www.dropbox.com/s/x3hjfztanhf7iox/Screenshot%202014-06-09%2014.53.30.png
Offline
Weird, everything works fine for me on NIX/BSD/OSX have you tried this:
http://penturalabs.wordpress.com/2013/08/11/proxmark3-client-complication-on-osx-10-7/
Last edited by midnitesnake (2014-07-22 20:39:44)
Offline