Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-10-03 08:12:14
- rookieatall
- Contributor
- Registered: 2016-07-31
- Posts: 25
hardnested problems
To try the hardnested fuction, I use a FUID card and write it with some different passwords which I record. Then I run the function.
pm3 --> hf mf hardnested 0 A 8829DA9DAF76 1 A
--target block no: 1, target key type:A, known target key: 0x000000000000 (not set), file action: none, Slow: No, Tests: 0
Allocating memory for partial statelists...
Generating partial statelists...
Generating bitflip statelist...
Acquiring nonces...
it just stops at acquiring nonces and after waiting for a long time, still nothing appear. Is there some problem with the card?
Offline
#2 2016-10-03 08:27:01
- gator96100
- Contributor
- From: Austria
- Registered: 2016-03-25
- Posts: 177
Re: hardnested problems
The hardnested command takes block numbers as input. Your taget block is in the same sector, so it's the same key.
Offline
#3 2016-10-03 09:13:01
- rookieatall
- Contributor
- Registered: 2016-07-31
- Posts: 25
Re: hardnested problems
The hardnested command takes block numbers as input. Your taget block is in the same sector, so it's the same key.
No it is different sector
Offline
#4 2016-10-03 09:18:16
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: hardnested problems
really no. @gator96100 is correct.
Offline
Pages: 1