Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-01-29 14:20:54
- maikxchd
- Contributor
- Registered: 2019-01-23
- Posts: 2
iclass DL issue
I'm a newbie in RFID research so please pardon me if this sounds too basic, i'm doing a research about the usage of RFID cards in my school. They use iCLASS DL cards to control access in high security areas. I tried using the pm3 easy to read the iCLASS card but the pm3 didn't find the card.
pm3 --> hf search
[!] timeout while waiting for reply.
[-] no known/supported 13.56 MHz tags found
this is confusing because i checked if the card i have is broken or not, i tapped it to a reader and it responds like a regular card.
then i checked if my pm3 easy is broken, looks unlikely as i'm able to read regular hid proxcards and mifare cards just fine.
am i doing something wrong here or is there something i'm missing? i'm using the pm3 easy with the iceman fork.
Offline
#2 2019-02-20 03:27:16
- Dot.Com
- Contributor
- From: Hong Kong
- Registered: 2016-10-05
- Posts: 180
- Website
Re: iclass DL issue
Have you tried hf iclass reader ?
Offline
#3 2019-05-03 06:31:44
- Panda
- Contributor
- Registered: 2017-08-02
- Posts: 3
Re: iclass DL issue
Same problem. Iv'e tried V2.5 also doesn't work.
Offline
Pages: 1