Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2014-01-22 13:44:48

ff
Member
Registered: 2014-01-21
Posts: 3

hf mf sniff problem

Hi, I tried the "hf mf sniff" command today, but it doesn't seem to work. I have an ACR122U reader with a Mifare Classic 1k card placed on it and the proxmark's antenna is directly placed on top of the card.
I start the command as follows:

proxmark3> hf mf sniff l
-------------------------------------------------------------------------
Executing command.
Press the key on the proxmark3 device to abort both proxmark3 and client.
Press the key on pc keyboard to abort the client.
-------------------------------------------------------------------------
.........................................................................

The red and yellow LEDs of the proxmark keep blinking constantly, but the command doesn't seem to return. I issued some commands to read the card's content with the reader and I waited quite a while, but the command does not terminate. Pressig the button on the proxmark eventually terminates the command, but I don't get any useful output and no log file is created.

Am I doing anything wrong here? Btw, I'm using rev 839.

Offline

#2 2014-02-11 21:44:09

clayer
Contributor
Registered: 2013-12-22
Posts: 45

Re: hf mf sniff problem

try this command with svn 807 to get worked

Offline

#3 2014-02-12 09:12:56

holiman
Contributor
Registered: 2013-05-03
Posts: 566

Re: hf mf sniff problem

There's a patch in the works, if you have time to wait for it I suggest you do that. Always easier to get support here in the forum for HEAD-revision than old revisions with other potential problems.

Offline

#4 2014-02-19 21:33:31

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: hf mf sniff problem

Committed r845 today which should fix the problem.

Offline

#5 2014-02-23 19:03:37

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: hf mf sniff problem

I really didn't use hf 14a snoop or hf mf sniff until I tested my recent patches. In fact I found that it could not have been too reliable in the past. Didn't you experience weird CRC! errors or shortened tag or reader responses?

Committed r846 which should be more reliable.

Offline

Board footer

Powered by FluxBB